Chrome-plated Metal Right Butt Door hinge N429 (L)75mm (W)75mm, Pack of 2
Product details
Product information
These chrome effect metal right hand rising butt hinges are suitable for raising interior doors over deep pile carpets. Fixings supplied for quick and simple installation.
- Only fixings included
Specifications
| Pack quantity | 2 |
|---|---|
| Hinge type | Butt |
| Location | Internal |
| Plating | Chrome-plated |
| Length (mm) | 75mm |
| Width (mm) | 75mm |
| Material | Metal |
| Opening direction | Right |
| Product code | 05066438 |
Manufacturer / EU responsible person
Manufacturer
Kingfisher International Products B.V.
Address
Rapenburgestraat 175, E,
Amsterdam
1011 VM
Netherlands
Contact
Reviews
2.83 / 5(12 reviews)Nobounds55 - 4 / 5 - 09/07/2026
Slight adjustment on hinges.
They need adjustment so they fit nearer flush easily done with a vice and grips, other than that they are good all round.
Baz07 - 3 / 5 - 04/04/2026
Great hinge /weak screws
Screws to weak snap or round very easy, hinges are very strong
Highwood - 5 / 5 - 04/10/2023
Good solution for new carpet!
Bought last month to avoid having to reduce a wooden bedroom door after a new thicker carpet and underlay were fitted. Easy fitment and worked erll
Peter the DIY man - 3 / 5 - 27/12/2022
Good Hinges-RUBBISH Screws
I bought these to make my door self closing. screwing in the screw made the head loose the crosshead-so could not remove the screw in or out. Cheap screws ruined it all and I had to hit 2 screws in with a hammer. Will never be able to remove screw again. BUY YOUR OWN HARDENED SCREWS.
cheyenne47 - 4 / 5 - 10/03/2017
Adequate for the job
Variable manufacturing quality for these, had to exchange to get a straight set, but works well.
Elinda - 5 / 5 - 13/02/2017
Work great
Work great. Very nice ones actually. From the mouth of my husband who fitted them.
Bob D - 1 / 5 - 07/11/2016
Oh no
Purchase a couple of dssets to replace the previous brass coloured ones. The holes are in different places. Makes replacing a nightmare. Why are the holes in these different from the previous same applies to the both left and right hand. Then when I went back I found one pair that was different to both pairs the holes were in line. If you are using for the first fitting they would be OK.
Mick G - 1 / 5 - 05/11/2015
Bit crude design but were low price
Needed for a door to clear a hall carpet runner, But design is pretty crude in that the socket bit is too baggy and the rising movement on the spindle tilts a bit under load only giving about half the rise expected when the hinges have no load on them. I suspect I need to pay a lot more for more precision jobbies. A bit ugly compared to standard hinges as well. Had to replace with a shorter runner instead.
blazeboots - 5 / 5 - 12/03/2015
Great Value
I brought these rising butts and found them very easy to install