Inc.VATEx.VAT
Contact usInc.VATEx.VAT
See more Jointing compound
DriLyner Plasterboard Plaster compound 25kg Bag
Sorry, this product is currently out of stock.
DriLyner Plasterboard Plaster compound 25kg Bag
£
Inc.VAT8.27
Currently unavailable
This item is not available at this time.This item is only available for purchase in store or by calling 0300 303 4481.
Product details
Product information
- Mix in a well ventilated area by hand or mechanical whisk using only clean water and lean mixing equipment. Do not add anything other than clean water as this practice will seriously affect the working qualities and may cause bond failure. Avoid excessive mechanical mixing. Allow to stand for 5 minutes before final mixing. Apply sufficient dabs of adhesive to cover not less than 20% of the board area, including a continuous fillet around wall perimeter and to service openings. Tap boards into alignment and lift tight to the ceiling, supporting them until the adhesive sets. Please see the Gyproc Systems Solutions manual for further detailed guidance
- A gypsum based bonding compound for use in Gyproc DriLyner Systems
- Dust from mixing or sanding may irritate the respiratory system, skin and eyes. Control dust formation, ventilate area of work. Avoid contact with skin and eyes. Dispose of in accordance with local or national regulations. For detailed MSDS please contact the Gyproc Technical Department
Features and benefits
- Extended working time
- Easy to mix
- Improved time allowance for adjustment
- Increased adhesion with less slippage
- One bag fixes approximately two 1200x2400mm boards, depending on the flatness of the background and the stand-off required
- Use within 90 minutes of mixing
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Specifications
| Application method | Plastering trowel |
|---|---|
| Colour | Cream |
| Coverage | 7m² |
| Drying time | 2-3 h |
| Location | Internal |
| Minimum application temperature | 5°C |
| Number of coats | 1 |
| Paintable | Not paintable |
| Product weight | 25kg |
| Sandable | Sandable |
| Setting time | 2min |
| Standard | EN 14496 |
| Product code | 5099421801926 |