Inc.VATEx.VAT
Contact us
Inc.VATEx.VAT

See more Paint

Home

Right chevron

Paint

Right chevron
Dulux Weathershield Warm graphite Satinwood Multi-surface paint, 750ml

Dulux Weathershield Warm graphite Satinwood Multi-surface paint, 750ml

Sorry, this product is currently out of stock.


Left chevron
icons.title_zoominicons.title_zoomouticons.title_zoomreset
Dulux Weathershield Warm graphite Satinwood Multi-surface paint, 750ml
Right chevron

Dulux Weathershield Warm graphite Satinwood Multi-surface paint, 750ml

£
20
Inc.VAT
£
26.67
per l
Loading
Checking availability...

Product details

Product information

    This Warm graphite paint has been specially designed to give a durable and long-lasting satin finish on exterior doors & windows. Simply apply with a brush or roller and leave for touch dry in 1 hour to dry - a great way to give the surfaces additional protection. Covers 10m² per litre on average.

    • For use on Doors & windows
    • Surface Preparation - Before using this product ensure all surfaces to be painted are clean and dry with no dirt, grease, rust or flaking paint. Areas affected by mould, algae or fungi should be treated with an appropriate fungicidal wash. Metal surfaces: Remove rust using Hammerite Rust Remover. On new galvanized surfaces, allow to weather for six months before application. New bare wood: To ensure 6 year weather protection is achieved, prepare bare wood with Weathershield Exterior Preservative Primer+ (BP), wiping off any excess. Surface defects should be repaired using the appropriate Polycell product. uPVC: Apply direct to clean substrate.
    • Instructions for Use - Stir thoroughly before use to ensure the paint is completely mixed. Apply two coats by brush or roller, allowing 4 hours between coats. Tip: Apply only in dry conditions, above 10°C and when bad weather is not forecast. If applying on uPVC, the use of light colours only, particularly on south facing elevations is recommended to avoid solar heat gain damaging the uPVC.
    • Instructions for Use - Stir thoroughly before use to ensure the paint is completely mixed. Apply two coats by brush or roller, allowing 4 hours between coats. Tip: Apply only in dry conditions, above 10°C and when bad weather is not forecast. If applying on uPVC, the use of light colours only, particularly on south facing elevations is recommended to avoid solar heat gain damaging the uPVC.

    Features and benefits

    • Multisurface, quick dry and water based paint that can be used on exterior wood, metal and uPVC
    • 6 year weather protection
    • Mould resistant film to minimise staining and flexible to prevent cracking
    • No primer required on metal or uPVC

    Legal Information

    • Contains methylisothiazolinone, 1,2-benzisothiazol-3(2H)-one, C(M)IT/MIT(3:1) and IPBC. May produce an allergic reaction. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.

    Health and safety

    Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.

    Specifications

    BrandDulux
    Application methodBrush or roller
    BaseWater-based
    ColourWarm graphite
    Coverage10m²
    Drying time1 h
    FinishSatinwood
    LocationExterior
    Recoat time4 hours
    Minimum touch dry time1h
    VOC levelLow
    Volume750ml
    WashableWashable
    Product code5010212617168