See more Resins & studs
Fischer 540039 3 piece Resin polyester Set, 300ml
- Compatible with Silicone dispensers
- UV resistant
- Read operation instructions on the cartridge before use
Features and benefits
- Opened cartridges can be re-used
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Product type||Resin polyester|
|Location||Internal & external|
|Number of pieces||3|
Really useful for poor plaster
Tzimi - 2 month ago
I've used this product for a number of years, and it's really good for cases where you're trying to fix items to less-than-perfect plaster. On this occasion, I'd already put up some spur shelves before I realised some of the plastic plugs weren't gripping very well. So rather than dismantle the shelves, I mixed batches of the resin by hand and injected it into the plugs using a syringe, before inserting the screws. This worked very well, and all the screws are tight now. The only thing to remember is that the drying time is very sensitive to ambient heat, and if it's too warm, you may find it sets very quickly, before you've even started. Mixing by hand is a good idea if you only need a small amount of product, as you don't waste what's in the mixing nozzle. I like this product, but have knocked a star off because the drying time in the instructions is not always accurate.