Inc.VATEx.VAT
Contact us
Job listRegisterSign in
Inc.VATEx.VAT

See more Shelf brackets

Home

Right chevron

Storage & shelving

Right chevron

Shelf brackets

Right chevron
Left chevron
Zoom inZoom outZoom reset
Form Alchimy White Steel Shelving bracket (H)200mm (D)150mm
Right chevron

Form Alchimy White Steel Shelving bracket (H)200mm (D)150mm

£3.50
Inc.VAT
Loading
Checking availability...
Loading
Checking availability...

Product details

Product information

  • Compatibility: From 150 to 300mm shelves
  • Compatible with 150 to 300mm shelves
  • Locate wall studs and mark mounting locations on the top hole of the brackets, ensuring the holes are level. You should install brackets into all possible studs along the length of your shelf for stated load capacities. Partially install screw into marked holes at stud locations leaving a small gap for bracket adjustment. Place the top hole of the bracket onto screw and push down to secure. Use screws to secure the bottom of the bracket into the stud. Tighten down the top screw. Rest shelf on brackets. Use screws to secure the board to the brackets
  • Fixings sold separately

Features and benefits

Perfectly supports shelving to help you store your belongings

  • The epoxy finish helps to prevent rust and ensures a long-lasting colour
  • The maximum load shown may be lower depending on wall condition. All loads should be distributed evenly

Specifications

BrandForm
Product typeShelving bracket
Pack quantity1
Product height200mm
Product weight135.2g
Product width32.3mm
MaterialSteel
Maximum load40kg
Model name/numberMB1
RangeAlchimy
ColourWhite
Product code3663602764540

Reviews

Full star
Empty star
Empty star
Empty star
Empty star
1 / 5(1 reviews)

Beware of these Bracket

Full star
Empty star
Empty star
Empty star
Empty star

Peter Perfect - 7 month ago

Please be aware - there bracket are hollow at the back therefore as you screw the screw in it pulls the rawl plugs out of the wall. I used the brackets with disastrous effects as you thing the screw is fully tightened where as the screw has only tightened itself to the bracket and not the wall. When using the cheaper brackets I had no problems only filling the original holes.