Skip to content
 
Refurbished

GoodHome Baldaz Satin Brass effect 3 Lamp Pendant ceiling light, (Dia)400mm - Refurbished

£51.20Inc. VAT

Product details

Product information

Product information

Add a touch of modern luxury to your home with the refurbished GoodHome Baldaz Brass Effect Pendant Ceiling Light. With its elegant brass finish and three-lamp design, this stylish pendant creates a warm and inviting atmosphere — perfect for kitchens, dining rooms, or living areas.

  • Guarantee - 1 year
  • Bulbs sold separately
  • Non-dimmable
  • Fittings & fixings included

Features and benefits

  • Bring an elegant touch to your home with this chandelier
  • The frosted finish creates a lovely anti-glare light to your room
  • Co-ordinate your lights with the matching table, ceiling, wall and floor lamps
  • This product may have been previously used and may show signs of wear and tear. The product has been PAT & Function tested and is in full working order. The product may have noticeable cosmetic marks and/or scratches and original packaging may have been replaced and/or show signs of transit or storage damage.
  • The item will be supplied with accessories/parts as detailed: Full testing - PAT and functionality tested. Component checked and supplied with all accessories. Thoroughly cleaned and ready to use

Legal information

  • This is a refurbished product. It may have previously been used so may show slight signs of wear and tear. All refurbished products come with a 1 year guarantee and have been restored to work like new. Please visit diy.com/refurbed for more information.

Specifications

Adjustable heightWithout adjustable height
Base colourBrass
Bathroom zoneNot suitable for bathrooms
Bulb typeRound
Cap fittingSmall edison screw cap (E14)
Diameter (mm)400mm
Drop685mm
Fire ratedNot fire-rated
Glass finishFrosted
Height (mm)685mm
IP ratingIP20
MaterialGlass & metal
Maximum bulb wattage10W
Model name/number61248
Motion sensorWithout motion sensor
Number of bulbs3
StyleModern
Product code5063022788467
Safety Information

These instructions are for your safety. Please read through them thoroughly prior to installation and retain them for future reference. All fittings must be installed by a competent person in accordance with local regulations (IET wiring regulation BS7671).

Check the pack and make sure you have all of the parts listed. Remove all packaging, wrap etc from the product. Decide on the appropriate location for your product. This product is suitable for indoor use only and not for areas constantly subject to moisture such as bathroom.

Always refer to the installation drawing for the orientation of the product. The product must be securely fixed to the mounting surface using the screws and wall plugs supplied. The screws and wall plugs supplied are suitable for “masonry” only. Other fixings not supplied and must be purchased. Take care not to drill into any pipes or mains cables beneath the surface during mounting holes preparation.

IMPORTANT: The fixing point(s) selected must be capable of supporting the full weight of the light fitting.

Wiring diagram is for reference only. Always refer to the terminal marking for wiring. Ensure that all electrical connections are tight and that no loose strands are left out of the terminal block.

Never put anything on the product or hang anything on any part of this product. Never use the terminal cables to bear the product weight.

When the product does not light after installation: > Ensure there is no electricity failure > Ensure all the connections are secured

If you have any doubt about installation/use of this product, consult a qualified electrician.

Always disconnect the product from mains at least 10 minutes allowing to cool down before any maintenance or adjustment.

It is recommended to have a regular schedule of care and maintenance to keep the surface condition well.