Skip to content
 

GoodHome Delaware Matt Wall tile & panelling paint, 750ml

£22Inc. VAT£29.33 per l
How much will I need?

Product details

Product information

GoodHome Wall Tile & Panelling Paint is a tough formulation, specially designed for kitchens, bathrooms and hallways. Refresh your space with matt Delaware. It's water resistant and washable, meaning it will withstand the frequent cleaning required in damp rooms. You can even use household cleaning products to help you clean away stains. Suitable for use on wood (bare, varnished, painted), PVC panelling, ceramic wall tiles and porcelain stoneware. It can also be applied to tiled shower walls.

  • Guarantee - Statutory
  • For use on Panelling & tiles
  • Suitable for use on Ceramic, plastic & wood surfaces
  • Surface Preparation - Preparation of the surface is essential to achieve a good result. Surfaces must be clean and dry. To prepare wall tiles, remove mould with a mould cleaner, wash with a soda based cleaner e.g. sugar soap then rinse thoroughly. It’s important to focus on the grout. Remove any silicone sealant before painting, you can re-seal after applying the paint . For previously painted tiles, ensure any loose or flaking paint is sanded and removed. To prepare new or bare wood, lightly sand and remove any dust then seal knots. Apply an appropriate undercoat to exotic and high tannin woods (oak).To prepare laminate, varnished or painted wood, wash with a soda based cleaner e.g. sugar soap, rinse then leave to dry. Lightly sand the varnished or painted floor in good condition and remove dust. On painted or varnished surfaces in bad condition: sand back to the original surface and remove dust. When sanding, wear a face mask to avoid dust inhalation.
  • Instructions for Use - Remove the additive sachet from the lid, carefully pour the whole packet into the paint and stir thoroughly for 2 minutes making sure you are working around the bottom of the tin. For best results, at least 2 coats are recommended using a brush or flock foam roller. Leave to dry for approximately 8 hours between coats, do not try to rework whilst the paint is drying. Apply between 10°C and 25°C. This pot will cover approximately 9 m². Once additive is mixed into the paint, it must be used within 7 days. Allow 10 days for the paint to fully cure. During this time treat your new paintwork with extra care, gently wiping any spills or liquids from the paint immediately. Use a mild detergent and non-abrasive sponge to clean the painted surface. This paint is not suitable for horizontal surfaces that will be subject to standing water.
  • Instructions for Storage - Remove as much paint as possible from your equipment. Clean brushes and rollers with soapy water. Do not dispose of the cleaning water down the drain. Store your leftover paint in a dry environment between 5°C and 25°C and protect from frost.

Features & benefits

  • Self-priming meaning less preparation required, paint adheres well and application process is easier
  • It's durable and water resistant, meaning it will withstand moisture in kitchens and bathrooms
  • Wipes clean easily with household cleaners, making it easy to maintain

Health and safety

Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.

Specifications
BrandGoodHome
Application methodBrush or foam roller
BaseWater-based
ColourDelaware
Coverage9m²
Container typePot
Drying time10 days
FinishMatt
LocationInterior
TextureSmooth
Recoat time8 hours
Room useAny room
Minimum touch dry time1h
VOC levelLow
Volume750ml
WashableWashable with household cleaners
Product code5063022597540
Manufacturer / EU responsible person

Manufacturer

Kingfisher International Products B.V.

Address

Rapenburgestraat 175, E,

Amsterdam

1011 VM

Netherlands

Contact