GoodHome Dius Round Matt Glass & metal White Frosted effect Ceiling light
Electrical recycling service
Thinking about buying a new electrical product from us? Find out about our electrical recycling service here
Product details
Product information
Product information
Ideal for general lighting, this beautiful ceiling light is ideal for hallways, living areas, bedrooms and kitchens. The decorative frosted glass design not only brings texture and interest to a room but effectively lights a room without a harsh glare.
- Guarantee - Statutory
- Fixings & Instructions included
- Bulb not included
- Non-dimmable
- Fittings & fixings included
Features and benefits
- Bring light to your home by adding a decorative touch with this beautiful GoodHome Dius ceiling light.
- Perfect as a main light for entrances, living areas, bedrooms and kitchens.
- Compatible with E27 bulbs (not included).
Specifications
| Adjustable height | Without adjustable height |
|---|---|
| Base colour | White |
| Bathroom zone | Not suitable for bathrooms |
| Brand | GoodHome |
| Bulb type | GLS |
| Cap fitting | Edison screw cap (E27) |
| Diameter (mm) | 300mm |
| Equivalent wattage | 42W |
| Fire rated | Not fire-rated |
| Fire rating | Not fire-rated |
| Glass finish | Acid etched |
| Height (mm) | 90mm |
| IEC protection class | Class I |
| IP rating | No IP rating |
| Light colour | Warm white |
| Light technology | Eco halogen |
| Material | Glass & metal |
| Maximum bulb wattage | 42W |
| Model name/number | CL371P-A |
| Motion sensor | Without motion sensor |
| Number of bulbs | 1 |
| Room use | Any room, excluding wet-rooms |
| Standard | EN 60598 |
| Voltage | 240V |
| Product code | 5059340226996 |
Safety Information
All fittings must be installed by a competent person in accordance with local regulations (IET wiring regulation BS7671).
IMPORTANT: The fixing point(s) selected must be capable of supporting the full weight of the light fitting.
Never put anything on the product or hang anything on any part of this product.
Never use the terminal cables to bear the product weight.
When the product does not light after installation: > Ensure there is no electricity failure > Ensure all the connections are secured
Always disconnect the product from mains at least 10 minutes allowing to cool down before any maintenance or adjustment.
Take care not to drill into any pipes or mains cables beneath the surface during mounting holes preparation.
The product must be securely fixed to the mounting surface using the screws and wall plugs supplied. The screws and wall plugs supplied are suitable for “masonry” only. Other fixings not supplied and must be purchased.
It is recommended to have a regular schedule of care and maintenance to keep the surface condition weli.
Wiring diagram is for reference only. Always refer to the terminal marking for wiring. Ensure that all electrical connections are tight and that no loose strands are left out of the terminal block.
Manufacturer / EU responsible person
Manufacturer
Kingfisher International Products B.V.
Address
Rapenburgestraat 175, E,
Amsterdam
1011 VM
Netherlands
Contact
Reviews
4.75 / 5(4 reviews)NightOwl - 5 / 5 - 09/06/2026
Simple light fitting at a great price
Needed a slim light that fitted close to the ceiling. This did not look much in the box but suits requirement perfectly and looks quite attractive in situ especially when illuminated. And for a very modest price.
Rosi49 - 5 / 5 - 25/03/2024
Bon produit
Bon produit, simple tout ce qu' il faut pour une entrée.
jpls - 4 / 5 - 17/01/2024
Conception à revoir
Le diamètre extérieur de la base étant inférieur à celui du verre l’effet rendu n’est pas très joli.
bleuloulou - 5 / 5 - 16/08/2023
bon
produit correspond à mes attentes