GoSystem Blow torch GB2070H
Under 18 yearsProduct details
Product information
This GoSystem cordless blow torch. It can reach a temperature of 1370°C.
- Compatible with Butane gas
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Specifications
| Brand | GoSystem |
|---|---|
| Compatible gas type | Butane |
| Maximum operating temperature | 1370°C |
| Model name/number | GB2070H |
| Pack quantity | 1 |
| Product code | 5036720207011 |
Safety Information
Manufacturer / EU responsible person
Reviews
2.45 / 5(20 reviews)lookers159 - 2 / 5 - 20/01/2024
ok when working
ok when working difficult to light kept going out once lit and warmed up worked ok was cheapest one on sale so recommend paying more and get self igniting burner instead
lookers159 - 2 / 5 - 20/01/2024
ok when working
ok when working difficult to light kept going out once lit and warmed up worked ok was cheapest one on sale so recommend paying more and get self igniting burner instead
CSTE101 - 1 / 5 - 01/11/2023
Poor quality, fails if you try to tighten it
If you tighten it to seal the gas tank the product breaks with the seal head falling off which renders the torque useless.
Itsme2 - 2 / 5 - 18/10/2023
Not good
Bought this a couple of days ago . Failed after one use . As I lost the receipt I got a credit note so that’s ok guess. Others also seem to have issues with this unit which is a shame cos the construction seems sturdier than some .
parsley1 - 5 / 5 - 01/09/2023
Excellent for small plumbing jobs.
Bought this as l needed to repair a small pin prick leak on a upstairs copper pipe using a click fix copper pipe repair patch. Perfect worked a treat. So pleased l didn’t buy a really expensive one.
Sub - 1 / 5 - 29/12/2022
Total waste
I bought this with the 2 of the 2350 gas cans that are listed on the box. It wouldn't work with either of them as the pin to depress the self sealing valve is too short. Frustrating waste of a day as the shop is far from where I needed the kit.
Ricardus - 2 / 5 - 16/04/2022
Refuses to stay lit for more than a few seconds
Good luck keeping the thing lit. At first I thought it was just me, but sounds like others have the same issue. I also suspected the gas, but is the same with a new can. Spend more time relighting it than actually using it. Very frustrating and unreliable.
Shorty_123 - 2 / 5 - 16/04/2022
Didn't work at all well for plumb soldering
Device wouldn't stay lit initially even with judicious gas control, flame was not focused enough to heat solder joints reliably. Would only suggest light use for this application as its more cost effective to go and buy the cheapest rothenburger torch (that plumbers prefer)
Rozztemp - 1 / 5 - 31/10/2021
Uncontrollable flame
A lot of soldering requires the flame to be held upside down, however as soon as you turn this upside down the flame shoots out at full pelt and is impossible to control, often overheating the joint. This torch is virtually unusable.
RogerJ - 1 / 5 - 16/03/2021
Very poor
I found this very difficult to light and once lit it would only stay lit for about a minute of use and then goes out. It would not then relight until cooled down a bit - and then would not stay lit. I shall be returning this as not fit for purpose. Given that some reviewers can't fault it would suggest that there are issues with manufacturing.