Inlight Dafyd Cone Gloss Antique copper effect LED Pendant ceiling light, (Dia)205mm
Electrical recycling service
Thinking about buying a new electrical product from us? Find out about our electrical recycling service here
Product details
Product information
Product information
This Dafyd 1 light pendant light would make a great addition to a modern home. The antique copper effect tones will add an industrial feel to your living space, and is part of a range with matching products so you can bring your interior space together..
- Matching products available in this range
- Bulb sold separately
- Non-dimmable
- Fittings & fixings included
- Guarantee - 1 year
Features and benefits
- Finished in antique copper effect with smoked glass
- 1x E27 GLS Max. 10W LED bulb required
- Cone design
- Ideal for bedrooms and living areas
Specifications
| Adjustable height | With adjustable height |
|---|---|
| Base colour | Antique copper effect |
| Bathroom zone | Not suitable for bathrooms |
| Bulb type | GLS |
| Cap fitting | Edison screw cap (E27) |
| Diameter (mm) | 205mm |
| Drop | 1200mm |
| Equivalent wattage | 42W |
| Fire rated | Not fire-rated |
| Glass finish | Smoked |
| Height (mm) | 1200mm |
| IP rating | IP20 |
| Light colour | Warm white |
| Light technology | LED |
| Material | Glass & metal |
| Maximum bulb wattage | 10W |
| Model name/number | BQ-CB-33238-SMK |
| Motion sensor | Without motion sensor |
| Number of bulbs | 1 |
| Pattern | Plain |
| Style | Industrial |
| Voltage | 220V |
| Product code | 5020024520761 |
Safety Information
Warnings on manuals (for all ceiling/wall lights) Important Safety Information All ceiling fittings should be connected via a 5-amp fused circuit and must be installed in accordance with current applicable building and electrical installation regulations. Before installation and servicing, disconnect the electrical supply at the mains. Carefully observe all instructions or warnings that are labelled on, or supplied with, your product. Unless otherwise stated, products are suitable for normal indoor use only and should not be used where water or high humidity may affect them. If in any doubt, consult a qualified electrician. Cleaning care The fitting should be cleaned with a soft, dry cloth only. Do not use polishes or abrasive cloths. Safety information For your safety, please remember the following: Always switch off the supply before removing shades/covers, changing lightbulbs or cleaning.
Manufacturer / EU responsible person
EU responsible person
Authorised Representative Compliance Ltd
Address
Ground Floor
71 Lower Baggot Street
Dublin
Ireland
D02 P593
Ireland
Contact
Reviews
4.5 / 5(2 reviews)CarolineJC - 4 / 5 - 20/02/2026
Good quality glass shades with copper accents
I bought these lights for our kitchen. Like the design. They were a little dark initially so have changed the bulbs to natural light which are much better.
Bainsy - 5 / 5 - 12/10/2022
This product is really great!
I bought this to go over my breakfast bar. It looks great and the aged copper look of the fittings make it look like a much more expensive light fitting. Very happy with it