Mapei Ultracare Keranet Easy Grout Residue remover Spray, 750ml

Product information

UltraCare Keranet Easy is used for cleaning residue from surfaces that have been grouted using cementitious grouts, and can be used on all acid resistant materials, such as porcelain, ceramic, glass mosaics, quarry tiles, terracotta and acid-resistant natural stone.

• Suitable for use on porcelain, ceramic, glassmosaics, quarry tiles, terracotta and acid-resistant natural stone.
• Chemical safety - sulphamidic acid CAS: 5329-14-6- EINECS: 226-218-8 - INDEX:016-026-00-0a) Aquatic acute toxicity : EC50 Daphnia = 71,6 mg/L 48h
• Instructions for Use - When used immediately after cementitious grouts, wait until it loses its plasticity and becomes opaque (the time required depends on the type of grouting product used), then spray UltraCare Keranet Easy evenly on the surface to be cleaned, leave it to react for 1-2 minutes and then proceed with a first cleaning using a moist cellulose sponge (MAPEI sponge type), working diagonally over the grout joints. Rinse the sponge frequently using two different containers of water, one to remove the excess grout from the sponge and the other for rinsing the sponge. On light cured grout residues spray UltraCare Keranet Easy evenly over the entire area at a suitable distance, working in manageable areas, letting it act for a few minutes. Then wipe over the surface removing it with the use of a moist cellulose sponge as described above.

Features and benefits

• Allows quick and easy removal of any residue immediately after grouting
• Quick and simple application, ready to use spray bottle
• Just 1-2 minutes contact time
• Perfect when installing large format tiles to avoid picture framing
• Can be used on the back side of tiles to remove any contamination
• Can also be used the day after grouting to remove any light traces of remaining cementitious residues