See more Floor paint & treatments
Ronseal Diamond hard White ash Satin Floor Wood varnish, 2.5L
This white ash floor varnish from the Ronseal Diamond range can be applied to interior using a brush. The varnish dries in just 30 minutes and will cover up to 18 m² per litre on average.
- Suitable for Wood
- Give bare floors a good sand then wipe down with white spirit. For previously painted floors remove all previous coatings & sand down.
Features and benefits
Want a floor varnish that lasts? Look no further. With Diamond Hard protection, this floor varnish from Ronseal will keep your wooden floors protected and looking great for longer. It'll protect your floors from knocks, scuffs, spills and heels, so it's ready for whatever daily life throws at it.
- Non-yellowing so you won't need to reapply as often
- Quick drying in just 30 minutes
- Ensures your wooden floors are protected and stay looking great
- Low odour so it's more pleasant to use
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Drying time||30 min|
|Recoat time||2 hours|
katev133 - 10 month ago
Really pleased we've used this on our new pine floorboards.
Finish is very very light
Fergie56 - 1 year ago
Just finished painting - used on stairs for a durable finish. Has taken 3 coats and very very light. Ended up adding emulsion to last coat to make darker. No sheen finish what so ever so a bit disappointed and time consuming.
Ash10 - 4 year ago
Have just finished putting 3rd coat on the floor, looks good. Only problem is there were lots of bubbles when doing the last coat. I was using a sheepskin like paint pad so had to go over the floor with a brush to get the bubbles out. I might do a fourth coat to get it whiter. I'm including pictures of the floor before we sanded, picture taken after one coat and after third coat (last 2 pics)
You will need time for this
Anonymous - 6 year ago
Used this on 2 parts of a room, one where the previous finish was worn though and one where it was not. Gave one part 4 coats and one 3 and it quite bright. It is a hard finish but you should give it at least 50-60 hours drying time which means having furniture out of the room for more than half a week. Can be tricky. Very happy and has had good comments from guests. Water-based so no problem with brushes. The grain also shows through very well.
To seal Diamond Hard White Ash Floor Varnish
Creative lulu - 6 year ago
Absolutely brilliant. Tough, but lovely finish. Easy to apply. Have used throughout the house on all floors, skirting sand architraves