UniBond No More Nails Waterproof White Grab adhesive 450g

• Suitable for Chipboard, concrete, masonry, plaster & wood
• Waterproof
• Suitable for Interior & exterior use
• Surfaces must be close fitting, clean, dry and free from dust, grease or paint. Apply a thin, even coat of adhesive to both surfaces, especially at the edges, using a serrated spreader or clean, short bristled brush. Ensure the entire surface to be bonded is covered. For best results, apply adhesive at a temperature of 18°C to 25°C. Replace the cap immediately. Allow the adhesive to dry for approximately 15 minutes until touch dry. Carefully align the parts and press together. Apply firm pressure for a few seconds from the centre of the bonded area outwards. Bonding will be instant and not repositionable, provided full strength within 24 hours

Features and benefits

• High strength adhesive that eliminates the need for nails and screws in many DIY and repair jobs
• No More Nails waterproof provides unparalleled support for heavier objects
• Instant grab