See more Tiling adhesives
UniBond UltraForce Ready mixed Ice white Tile Adhesive & grout, 12.8kg
Use the Unibond Wall Tile Adhesive and Grout for ultimate durability. Drying time is 24 hours and it is suitable for ceramic, porcelain and mosaic surfaces.
- Suitable for Ceramic & porcelain
- Mould resistant
- Water resistant
- Not suitable for underfloor heating
- Lifetime guarantee
Features and benefits
- UltraForce fibre technology for ultimate durability
- Triple protection system repels and protects from mould. The revolutionary slow release anti-mould fungicide lasts more than 50% longer than standard fungicides
- Suitable for large format tiles 300x600 mm
|Coverage per pack||8m²|
|Drying time||24 h|
No good for large tiles
skofimum - 1 month ago
Bought this thinking it would be perfect with a name like unibond behind it but was absolutely awful. It does state that larger tiles take up to 72 hours to dry but after 4 days they still slipped off when spacers were removed. Might be ok for small wall tiles but anything bigger forget it. Had to go and buy an alternative which did the job no problem. Haven’t even tried it as a grout as texture is not good. There is no substitute for the stuff you mix up yourself. Much better than ready mixed dual purpose. It’s not good at either
Just the job
Anonymous - 2 month ago
Used UniBond before thought i try this to to redo a small toilet area. Was easy to spread on and has fixed the tiles well. Grouting was simple and it has a super white finish really happy - easy job no faffing with powders and mixing.
This product has a serious flaw
mcdoofw - 6 month ago
After 10 days I was still waiting for the tile adhesive to set, I gave up and was forced to lift the tiles, adhesive still wet, nightmare mess and great expense and time to correct avoid!
Fails at both tile adhesive and grout
jatros - 11 month ago
I have fitted 300 subway tiles in a small downstairs toilet using Mapei Mapegrip ready mixed adhesive with no issues what do ever - unfortunately I ran out with just 25 tiles left to fit. Thinking that the next job is to grout I thought for the sake of 25tiles I’d buy this product and then use it to grout afterwards. Terrible decision.
The tiles I used the adhesive for all needed to be removed as the adhesive is so wet is slumped down behind the tile causing the top of the tile to tip inwards (to note - I had skimmed the walls so there wasn’t an excessive amount of adhesive behind the tile). I ended up buying a small pot of Mapegrip to finish the tile fitting...with great success.
I then thought I’d try it as a grout as maybe it’s better for that job. Once again terrible decision.
The grout did not go off evenly, making it nearly impossible to get a good finish - it’s just too wet to use and get a decent finish. I ended spending hours scraping all the grout out and cleaning the joints to allow me have another go with a BAL product.
In short - utter rubbish, if you have pride in your work - don’t use it.