See more Sealants
Unika Colorfill Dark stone Matt Worktop Worktop sealant & repairer, 20ml
This dark stone grey ColorFill joint sealant and repairer is an adhesive and sealant in one. Seal joints in worktops & repair chips or scratches in laminate surfaces.
- Comes with 25g tube colour matched ColorFill, 20ml bottle of ColorFill solvent and applicator tool
- Keep out of reach of children. Keep away from heat, smoke, hot surfaces, sparks, open flames and other ignition sources. Avoid breathing fumes/vapours. Use only in a well-ventilated area
- Use 1 tube of ColorFill per joint. Apply a thick bead of ColorFill around the leading edge of the joint to both the bottom and top of the exposed core taking care to ensure adequate sealant around the front and back edges and bolt slots. Quickly close the joint and allow excess sealant to squeeze out of the joint, align the two sides and tighten the bolts fully. Do not overstress joints. It is important that the joint is closed quickly as the sealant will start to set immediately. The excess sealant should be removed with a spatula which should be drawn towards the front edge from the back of the worktop applying pressure down and into the joint thus ensuring there are no air holes along the top of the joint
Features and benefits
ColorFill is a waterproof laminate worktop joint sealant and repairer which seals joints and excludes the need for silicone. Available in a variety of colours, so you can match it to your worktop décor and leave an almost invisible mitre joint.
- Easy to use, comes complete with an applicator tool
- Resistant to water
- Keep out of reach of children. It is recommended not to apply in the presence of naked flames, hot surfaces or unprotected electrical equipment
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.