V33 Pure white Matt Interior 2-in-1 Anti-mould paint, 750ml

Product information

V33 Anti-mould 2-in-1 Paint provides long lasting protection against mould growth and a pure white painted surface. With a quick drying formulation this pant resists steam and condensation and does not flake or peel. It is also scrubbable allowing for easy maintenance.

• Surface Preparation - Proper surface preparation is mandatory to achieve a high-quality final result. Important: use an appropriate treatment to get rid of any existing mould before applying the product. If mould is caused by moisture, make sure the underlying moisture problem is fully resolved before painting. Surfaces must be clean and sound. Brush, scrape, and/or dust off the surface. Remove moss, algae, and mould, then treat with an appropriate product to ensure perfect paint adhesion. On new and sound porous surfaces, on plaster: dust off and apply a special plaster primer. If you have recently plastered your walls or ceilings, allow them to dry for seven days before applying the primer. On wood, concrete, cement, and derivatives: lightly sand, dust off, then apply a universal primer. On wallpaper or fiberglass mesh: apply a special plaster primer. On previously painted surfaces: wash, sand, and dust before application. For damaged surfaces, remove any loose materials and fill cracks with an appropriate filler beforehand. On sound surfaces: wash, rinse thoroughly with clean water, let dry, then lightly sand and dust off.
• Instructions for Use - Ideal application conditions: between 12°C and 25°C and away from drafts. Before application, stir well with a wide stick, paying special attention to the bottom of the can to thoroughly homogenize the paint. Apply evenly over the entire surface. Do not stop the application in the middle of the surface. Always start painting from the window side. Do not go back over your work while it’s drying: you may see visible touch-up marks, but these will disappear once dry. For optimal performance, apply two coats. Do not cover your anti-mould paint with another paint, as it would cancel its effect. Remove as much paint as possible from the tools after use. Do not dispose of residues and washing water/solvents in the sink, toilet, sewer, bin, in order to avoid discharge into the environment. *To wash surfaces: Clean with sugar soap, rinse thoroughly with clean water, and let dry.

Features and benefits

• 2-in-1 Paint & Protection
• Long lasting effectiveness against mould growth
• Won't peel or flake
• Quick drying and non-drip for a fast, flawless finish
• Resists steam and condensation
• Allows the wall to breathe