Skip to content

The new tradepoint app! Membership at your fingertips. Download now >

Inc.VATEx.VAT
Contact us
Inc.VATEx.VAT

See more Plaster

Home

Right chevron

Building supplies

Right chevron

Plastering supplies

Right chevron

Plaster

Right chevron
Left chevron
icons.title_zoominicons.title_zoomouticons.title_zoomreset
Volden Plasters Not quick dry Requires preparation Undercoat plaster 7500g Bulk bag
Right chevron

Volden Plasters Not quick dry Requires preparation Undercoat plaster 7500g Bulk bag

£
11
Inc.VAT
£
1.47
per kg
Loading
Checking availability...

Product details

Product information

    Bonding Plaster is a backing plaster, specially formulated for easy application to new walls as an undercoat, and for repairing old walls before skimming.

    • Guarantee - Statutory
    • Resistant to cracking & impact
    • Paintable
    • Preperation: Ensure the surface to be smoothed is dry and free from grease, dust and loose particles. Cover nail heads with an oil/solvent based paint to prevent rusting. Do not apply at a temperature below 8°C or above 30°C. Mix thoroughly before use. Application: 1. Add approximately 500ml water per 1kg powder (50%) Mix by hand or mechanical whisk using clean water and equipment. The mixture should be applied within 50 minutes. 2. Roughly apply the coating in successive areas approximately 1m² using a coating blade or trowel to a maximum depth of 12mm. 3. Using a trowel or blade level the surface by distributing the coating evenly. 4. Product is ready to be over skimmed with plaster approximately 90 minutes after application dependent on the substrate and ambient conditions. Can be used as a one coat if polished up. 5. Wash tools in warm water before the coating hardens.
    • Comes with None
    • Keep out of reach of children and animals. Inhalation of dust must be avoided. The work area must be ventilated or move to fresh air. A suitable face mask should be worn if sanding. Dust may be an irritant to eyes, sensitive skin or respiratory system. Contact should be avoided with eyes and skin. Suitable protection should be worn. If product comes in contact with eyes or skin, wash at once with clean water. In the case of eye contact, bathe eyes for 15 minutes. If irritation persists seek medical advice. Ingestion should be avoided. If ingested, rinse mouth with clean water and seek medical advice. Vomiting should not be induced
    • Impact resistant

    Features and benefits

    • Easy Application
    • Ideal for quickly filling deeper cracks, chases or holes up to 10-12mm
    • Ideal for new walls and repairing old walls
    • Provides an excellent base coat
    • Easy to spread and smooth
    • This product dries white making it possible to carefully smooth it off/polish it to a finish that doesn’t require any skim or filler over the top
    • Minimal shrinkage
    • Powdered Formula - Requires Mixing

    Health and safety

    Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.

    Specifications

    BrandVolden
    Container typeBulk bag
    Pack quantity1
    Coverage1m²
    Drying time90-150 min
    Product weight7.5kg
    LocationInternal
    Ready for useRequires preparation
    StandardEN 13279-1 : 2008
    Suitable surfaceWall & ceiling
    Number of coats2
    SandableSandable
    Colour groupWhite
    VOC levelNo VOC level recorded
    Volume0L
    Product code5059340822495