Volden Ready mixed Plaster repair, 2.1kg, 2.5L Tub

Product information

With a lightweight formulation this ready mixed product is perfect for repairing plaster without the risk of slumping. Gypsum based, this product is equally at home on ceilings as it is on walls. Easy to sand in preparation for decorating

• Guarantee - Statutory
• Resistant to cracking
• Stir the compound to a smooth consistency. Apply the first layer using a filling tool. An even surface can be achieved with a skim coat not exceeding 5mm in thickness. Use a clean wet tool to smooth off and wet between strokes. Or smooth off using a straight edge (a wooden batten or similar), Allow 90-120 minutes drying time for the base layer and then apply a second layer and finish to a smooth level surface. When the surface it firm to touch but before completely dry, spray with water and polish with a clean tool to achieve a smooth finish. Allow at least 24 hours to dry or for deeper repairs, several days may be needed. Once set hard, gently rub down using sandpaper. Brush or wipe down the surface to remove any dust created from sanding. When the surface is clean it can be painted using matt or silk vinyl paint.
• Stir the compound to a smooth consistency. Apply the first layer using a filling tool. An even surface can be achieved with a skim coat not exceeding 5mm in thickness. Use a clean wet tool to smooth off and wet between strokes. Or smooth off using a straight edge (a wooden batten or similar), Allow 90-120 minutes drying time for the base layer and then apply a second layer and finish to a smooth level surface. When the surface it firm to touch but before completely dry, spray with water and polish with a clean tool to achieve a smooth finish. Allow at least 24 hours to dry or for deeper repairs, several days may be needed. Once set hard, gently rub down using sandpaper. Brush or wipe down the surface to remove any dust created from sanding. When the surface is clean it can be painted using matt or silk vinyl paint.
• Keep out of reach of children and animals. Inhalation of dust must be avoided. The work area must be ventilated or move to fresh air. A suitable face mask should be worn if sanding. Dust may be an irritant to eyes, sensitive skin or respiratory system. Contact should be avoided with eyes and skin. Suitable protection should be worn. If product comes in contact with eyes or skin, wash at once with clean water. In the case of eye contact, bathe eyes for 15 minutes. If irritation persists seek medical advice. Ingestion should be avoided. If ingested, rinse mouth with clean water and seek medical advice. Vomiting should not be induced.Product manual handling – always use approved manual handling methods. For further advice, refer to www hse.gov.uk

Features and benefits

• Perfect for plaster & plasterboard repairs
• Lightweight Formulation
• Ready Mixed
• Non slumping
• High cracking resistance
• Can be stored and reused at a later date (see use by date on packaging)