Volden Yellow Mortar foam, 750ml Cannister - Ready for use

Product information

A high quality ready to use stone adhesive

• Guarantee - Statutory
• For bonding non bearing interior walls
• If kept stored in a cool, dry place, in unopened original packaging, between +5°C and +25°C, shelf life is up to 18 months from production date. Store the canisters in an upright position.
• Danger Contains Diphenylmethane-diisocyanate, isomers and homologues, Alkanes, C14-17, chloro. Contains isocyanates. May produce an allergic reaction. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Harmful if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. Suspected of causing cancer. May cause harm to breast-fed children. May cause damage to organs through prolonged or repeated exposure. May cause long lasting harmful effects to aquatic life. Extremely flammable aerosol. Pressurised container: May burst if heated. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Do not breathe mist/vapours/spray. Avoid contact during pregnancy and while nursing. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Wear protective gloves and eye/face protection. - IF ON SKIN: Wash with plenty of soap and water. IF INHALED: Remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms: Call a POISON CENTER or doctor. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Dispose of contents/container in accordance with local, regional, national, and international regulations as applicable. Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. Type A1 according to standard EN 14387) is used. As from 24 August 2023 adequate training is required before industrial or professional use.

Features and benefits

• Stronger bond & Lighter than traditional mortars
• Manual Application
• Specifically developed for bonding non-bearing interior walls of Gypsum, Concrete & Limestone
• For use on multiple surface types
• Lower adhesive consumption due to thin bonding thickness
• Simple and labour friendly application
• Can be covered with sealant/plaster once fully cured
• Paintable
• Paintable
• Easy to use manually with a plastic straw