8 people bought this in 48 hours
Artex Easifix Texture repair kit, 1.5kg
Product details
Product information
This texture repair kit is suitable .
- For restoring damaged texture to a required texture pattern
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Brand | Artex |
|---|---|
| Coverage | 3m² |
| Drying time | 24 h |
| Weight (kg) | 1.5kg |
| Location | Internal |
| Product code | 5015892862389 |
Reviews
4.28 / 5(21 reviews)- 5 / 5 - 22/04/2025
Good value product, wife thinks I’m a professional
I bought this to repair a wall and ceiling following replacement of a Velux window. It came with enough plaster even when mixed slightly thicker. The kit included a really useful stipple brush which enabled me to match the original circle finish perfectly. The wife was well impressed, which is all you need really.
Macdaddy1046 - 4 / 5 - 19/04/2025
Product great. Collection not good.
I bought this product last month and have now used it. It's worked well and is very easy to use and apply. Jobs a good one. Picking up the item was the problem. Arrived at pick up pick to find a long queue. No checkouts or self service open and it was after 0900hrs. So everyone was queuing at the pick up point. Waited nearly 20mins then people started to man the checkouts.
RM2025 - 5 / 5 - 20/01/2025
Great product for Artex repairs
I bought this artex easifix to repair some damage to a ceiling and wall, the product work well and the repair looks good. First time i have used anything like that and it was easy.
claribass - 5 / 5 - 29/03/2024
Artex Easifix Texture Repair Kit
I found that the kit was ample for covering two square meters of ceiling with a ripple pattern. The applicator worked well and the instructions were good. My only doubt is whether the mix would stretch to three meters as advertised.
Moz79 - 1 / 5 - 21/01/2024
Do not buy
Mixed in the quantities on the instructons and it'sbasically the consistency of water. Absolute waste of money
always the best - 4 / 5 - 01/04/2023
Fantastic result for an artex ceiling repair job.
Have never carried out such an artex ceiling repair and wanted to be sure it blended in and became invisible when painted. Only needed to use half the kit, and this was good because even though I very carefully measured out the quantity of power to water and was able to do a first fill over the area to bring it up to same level at rest of ceiling when I tried to complete the job by creating a broken leather pattern, the mix was ever so slightly too wet and dripped. However, by adding just a little of the leftover powder, a small amount at a time, I was able to get to the point where the mix was perfect as it had stopped dripping from the spatchular and the spiky took that came with the kit and I have covered with a plastic bag as instructed, to create the broken leather effect. PERFECT RESULT. Therefore my recommendation is:- when making the first mix, be sure to keep a half jam-jar of power in reserve so it can be added if needs be for the finishing off. Highly recommened.
MickJL - 4 / 5 - 31/03/2023
This product is good
This product is as stated . However I have not managed to produce a heavy stipple finish, overwise it mixes as stated.
Kaytee22 - 5 / 5 - 15/03/2023
Makes a lovely finish.
The kit is easy to use and left a good finish. I would recommend it.
Becky9393 - 5 / 5 - 19/01/2023
AMAZING!!
I bought this after reading the reviews and hoped for the best, I've never been so impressed with a product I've taken a chance on. The video made it super easy to understand and follow. The application was easy and worked great. 100% recommend this. I've never had any experience in doing this either and you wouldn't know looking at the finished result.
barryn2003 - 4 / 5 - 29/12/2022
Very good for repairing small areas
I bought this kit to re-artex the damaged ceiling above my shower. Be careful to read the instructions in detail as I added too much water and caused myself some sloppy moments! (Definitely my fault, not the instructions). The included brush/applicator was smaller than that used by my original plasterer, making it tricky to match the pattern, but I am happy with final result.