Sorry, this product is currently out of stock.
Craig & Rose 1829 French Ochre Chalky Emulsion paint, 50ml
How much will I need?
Product details
Product information
Product information
Test out Craig & Rose 1829 - French Ochre Chalky Emulsion with this handy 50ml tester pot, perfect for checking the colour and finish against the natural light in your own home.
- Guarantee - Statutory
- Surface Preparation - Remove loose or flaking paint. Fill cracks or holes with a filler and sand smooth. Lightly abrade any silk, satin or glossy painted surfaces before painting over. Clean and dust-off surfaces before painting. Bare or porous surfaces will require sealing with Craig & Rose All Purpose Undercoat.
- Instructions for Storage - Protect from frost & extreme temperatures. Store in a well ventilated area. Keep container tightly closed.
Features and benefits
- Dead flat matt finish 3% sheen
- A+ rated for indoor air quality
- All 1829 finishes are water based, quick drying and very low VOC
- Ideal for use on walls and furniture
- Available in 110 colours
- We want you to be satisfied with your colour selection. Not all monitors will display colours the same and paint tins may not show the same colour as your walls do in natural light. We therefore recommend you purchase a tester pot so you are sure that this is the right colour for you.
Specifications
| Brand | Craig & Rose |
|---|---|
| Application method | Brush, roller or spray |
| Base | Water-based |
| Colour | French Ochre |
| Container type | Tester pot |
| Coverage | 0.05m² |
| Coverage per litre | 14m²/L |
| Drying time | 2-4 h |
| Maximum application temperature | 30°C |
| Minimum application temperature | 10°C |
| Number of coats | 2 |
| Quick dry | Quick dry |
| Recoat time | 2-4 hours |
| VOC level | Minimal |
| Volume | 50ml |
| Washable | Wipeable |
| Product code | 5036211071886 |
Safety Information
KEEP OUT OF REACH OF CHILDREN. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Avoid contact with skin and eyes. Wear waterproof gloves and safety glasses. Use only in well ventilated areas. Wash hands after use. PROTECT FROM FROST. DISPOSAL. Refer to local authorities for disposal advice. Do not empty into drains & waterways. Store and transport in an upright position.
Contains BIT (Benzisothiazolinone) or CMIT (5-Chloro-2-methyl-4-isothiazolinone-3-one [EC No.247-500-7]). May produce an allergic reaction. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Special precaution should be taken during surface preparation of pre 1960s painted surfaces over wood and metal as they may contain harmful lead. EU limit value for this product (cat A/a) is 30g/l (2010). This product contains max <1.5g/l VOC.
Manufacturer / EU responsible person
EU responsible person
CROMOLOGY
Address
ZI de la Kruystraete
WORMHOUT
59470
France