Craig & Rose Artisan Rust Textured effect Matt Topcoat Activator solution, 250ml

KEEP OUT OF REACH OF CHILDREN. Read the label before opening or using. Keep container tightly closed. Avoid breathing mist, vapours or spray. Use only outdoors or in a well ventilated area. Wear protective clothing, gloves, eye/face protection and a suitable respirator as required. Wash contaminated clothing before re-use. Wash hands, face and all exposed skin thoroughly after handling. Store locked up. Store in a well ventilated place, away from foodstuffs, acids, alkalis, metals and oxidising agents. Do not empty into drains. PROTECT FROM FROST. FIRE: If involved in a fire use water fog, foam or dry agents. Avoid breathing products of combustion. SPILLS: Clear area of all unprotected personnel. Slippery when spilt. Wear protective equipment. Absorb with sand or soil. Collect and seal in properly labelled drums. Refer to local authorities for disposal advice. Do not empty into drains and waterways. Store and transport in an upright position.

CONTAINS:10 - 30% AMMONIUM CHLORIDE, 1 - 10% HYDROCHLORIC ACID, < 1% COPPER ACETATE. Causes skin irritation. Causes serious eye irritation. May cause repiratory irritation. EU limit value for this product (cat L/l) is 200g/l (2010). Contains max 0g/l VOC.

If poisoning occurs, contat a Doctor or Poisons Information Centre NHS111. SWALLOWED:Rinse mount with water. If swallowed, do NOT induce vomiting. Drink a glass of water. EYE: If in eyes, hold eyes open, flush with running water for at least 15 minutes. SKIN: If skin or hair contact occurs, immediately remove any contaminated clothing and wash skin and hair thoroughly with running water. If swelling, redness, blistering or irritation occurs seek medical assistance. INHALED: Remove from contaminated area - avoid becoming a casualty. Allow patient to assume most comfortable position and keep warm. Seek medical advice.