Cuprinol UV Guard Teak Wood oil, 2.5L
Product details
Product information
Product information
Cuprinol UV Guard Teak Decking Oil can be used to penetrate into wood to replace natural oils and resins lost through weathering. Its tinted formula revitalises the colour of weathered wood.
- Guarantee - Statutory
- Suitable for Wood
- Water resistant
- Mould resistant
Features and benefits
- Nourishes the wood and protects against the weather
- Lightly tinted finish
- Can be applied by brush or any Cuprinol sprayer
- Water-based
- Up to 8m² per litre with 2 coats on bare or previously stained wood
- Up to 6 hours drying time, depending on the nature of the surface and the weather conditions
- Apply two coats for the perfect finish
- For use on all decking
- Cleaning up: Remove as much product as possible from the brush before cleaning with water
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Application method | Brush or roller |
|---|---|
| Base | Water-based |
| Brand | Cuprinol |
| Colour | Teak |
| Coverage | 20m² |
| Drying time | 8 h |
| Location | Exterior |
| Minimum touch dry time | 300min |
| Number of coats | 2 |
| Recoat time | 6 hours |
| VOC level | Low |
| Volume | 2500ml |
| Product code | 5010212656044 |
Safety Information
Keep out of reach of children. If medical advice is needed, have product container or label at hand..Do not get in eyes, on skin, or on clothing..Call a doctor if you feel unwell..Dispose of contents and container in accordance with all local, regional, national and international regulations..Contains.1,2-benzisothiazol-3(2H)-one, CMIT/MIT(3:1) and 2-methyl-2H-isothiazol-3-one. .May produce an allergic reaction..Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
Manufacturer / EU responsible person
EU responsible person
Akzo Nobel Coatings BV
Address
Rijksstraatweg 31
2171 AJ
Sassenheim
South Holland
2171 AJ
Netherlands