Dulux Trade Clear Satin Wood varnish, 1L
Product details
Product information
Perfect for a solvent-based interior varnish which gives a tough & durable finish. it can be used over bare wood & previously stained or varnished surfaces, this clear varnish from the Dulux Trade range can be applied to interior using a brush. The low odour, non yellowing varnish takes 6-8 hours to dry and will cover up to 16 m² per litre on average.
- A solvent-based interior varnish which gives a tough & durable finish. It can be used over bare wood & previously stained or varnished surfaces.
- Suitable for Wood
Features and benefits
- Tough and durable finish
- It can be used over bare wood and previously stained or varnished surfaces
- Withstands knocks,scuffs and spills
- Suitable for interior wood,veneer,cork and chipboard
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Brand | Dulux Trade |
|---|---|
| Colour | Clear |
| Coverage | 16m² |
| Location | Interior |
| Drying time | 6-8 h |
| Recoat time | 16-24 hours |
| Finish | Satin |
| VOC level | High |
| Base | Solvent-based |
| Application method | Brush |
| Container type | Tin |
| Washable | Washable |
| Volume | 1000ml |
| Product code | 5010212568590 |
Reviews
4.16 / 5(6 reviews)paintwarrior - 4 / 5 - 28/04/2025
good paint
decent coverage, lovely shade. good colour and rolled well.
stevieshb - 5 / 5 - 15/12/2024
As expected
I bought this a month ago it worked as expected…..
Simon R - 5 / 5 - 06/10/2024
Oak skirting
Quality product, far better than water based varnish.
jam90 - 5 / 5 - 10/05/2023
Great coverage
Goes on nicely with a good brush and leaves a eye pleasing finish bought to protect unfinished oak interior doors
Rx8 - 5 / 5 - 13/04/2020
Quality product.
Gives a great finish quality product goes a long way have varnished 7 doors first coat, now on seconed tin to finish and one back up if needed.
Mumseyiow - 1 / 5 - 04/10/2019
Not clear
Very disappointed that this product dies not dry clear. It goes on lovely with a brush but I am very disappointed with the finish.