Evolution 1200W 240V 210mm Corded Compound mitre saw R210CMS

Warning: Wear hearing protection

WARNING: Do not operate this machine if warning and/or instruction labels are missing or damaged. Contact Evolution Power Tools for replacement labels. WARNING: This product is a Compound Mitre Saw and has been designed to be used with special Evolution blades. Only use accessories designed for use in this machine and/or those recommended specifically by Evolution Power Tools Ltd.

WARNING: This product is a Compound Mitre Saw and must only be used as such. It must not be modified in any way, or used to power any other equipment or drive any other accessories other than those mentioned in this Instruction Manual. WARNING: Do not allow persons unfamiliar with the machine or these instructions to operate the machine. Machines are dangerous in the hands of untrained users. Children should be supervised to ensure that they do not have access to, and are not allowed to play with this machine. Children should be supervised to ensure that they do not have access to, and are not allowed to play with, this machine. WARNING: When using electric tools basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury including the following. WARNING: Read all safety warnings and instructions before attempting to operate this product and save these instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

WARNING: If you suspect that paint on surfaces in your home contains lead seek professional advice. Lead based paints should only be removed by a professional and you should not attempt to remove it yourself. Once the dust has been deposited on surfaces, hand to mouth contact can result in the ingestion of lead. Exposure to even low levels of lead can cause irreversible brain and nervous system damage. The young and unborn children are particularly vulnerable. WARNING: Some wood and wood type products, especially MDF (Medium Density Fibreboard), can produce dust that may be hazardous to your health. We recommend the use of an approved face mask with replaceable filters when using this machine, in addition to using the dust extraction facility.

WARNING: Rotating circular saw blades are extremely dangerous and can cause serious injury and amputation. Always keep fingers and hands at least 150mm away from the blade at all times. Never attempt to retrieve sawn material until the cutting head is in the raised position, the guard is fully closed and the saw blade has stopped rotating. Only use saw blades that are recommended by the manufacturer and as detailed in this manual and that comply with the requirements of EN 847-1.

WARNING: When using electric tools basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury including the following. Read all these instructions before attempting to operate this product and save these instructions. WARNING: Only check the operation of the blade guarding system with the machine disconnected from the power supply.

WARNING: Do not use the blade guard as a‘lifting point’. The power cord must be removed from the power supply before attempting to move the machine. • Lock the Cutting Head in the down position using the Cutting Head Locking Pin. • Loosen the Mitre Angle Locking Screw. Turn the table to either of its maximum settings. • Lock the table in position using the Locking Screw. • Use the two carry handle cut-outs machined into either side of the machine base, to transport the machine.