17 people bought this in 48 hours
FloPlast 2 bowl Kitchen sink waste kit, (Dia)40mm
Product details
Product information
Part of the drainage system, this double bowl sink waste kit from FloPlast is made from hard-wearing polypropylene and has a compression fitting type. It's suitable for plastic pipes to bs 5254 and bs 5255, copper waste pipes to bs 659 and bs 2871..
- Comes with Full 76mm seal
Specifications
| Brand | FloPlast |
|---|---|
| Model name/number | 209446 |
| Material | Polypropylene (PP) |
| Product diameter | 40mm |
| Product weight | 451g |
| Product code | 5055149928628 |
Manufacturer / EU responsible person
Reviews
2.61 / 5(13 reviews)Kimlar - 5 / 5 - 04/05/2023
Under sink pipe
Went together easily and sorted our problems out simples
Scotty51 - 4 / 5 - 04/07/2022
Did the job well
Fitted the sink perfect after cutting the horizontal pipe slightly. Maybe not the thickest of seals but seems to be fine so far and everything is tight.
Dobbo80 - 1 / 5 - 23/02/2022
Leak within a week
Not the easiest to fit, but that might be on my plumber's head. Leaking within a week and thread doesn't match up, though. Terrible product.
Diy Russ - 5 / 5 - 28/11/2021
Did the job
Did a great job on my 1 and a half bowl kitchen sink. Fits together well and no leaks.
ghghgh - 3 / 5 - 14/11/2021
Expensive for what it is
I got this to plumb in a new 1 1/2 sink. The height of the trap became a problem as it's the only bit that's not height adjustable. Ended up having to cut some of the shelf away to accommodate it. Another problem was that the rings to tighten the gaskets were too short to grab the thread when a pipe is in the fitting. Luckily I had some better designed ones at hand from the previous set up. So, not exactly a simple to use product, needed quite a bit of swearing and swapping bits out to get it to work.
Geth - 1 / 5 - 20/03/2021
Not moulded correctly
Bought this in B&Q Barnstaple to replace our leaking sink trap. Got all the way home and on opening the packet discovered one of the screw ends was completely miss moulded in the factory so no way of making a seal. Very poor quality control. Unfortunately this meant a 45 min round trip for my wife to source a replacement. Cheers B&Q, I will by better quality next time!
Traffy - 1 / 5 - 28/02/2021
Rubbish
Seemed a good quality product until you find out that several of the screw fittings don’t tighten up as they should ! Avoid at all cost. Ended up having to use part of another kit to finish a simple job.
Timothy Godfrey - 1 / 5 - 21/01/2021
don’t buy! Don’t buy!
Really cheap seals and general poor quality. Spent over four hours trying to get it to seal. Finally gave up and bought a slightly more expensive one from McAlpine - better quality and all installed in 10 minutes!
Scaff52 - 2 / 5 - 06/01/2018
Mr G Goodwin
I bought this item a week ago, after I have cut the parts to size I fixed it to sink and after a week it fell apart. I have fitted items like this before with no problem. I find that the trouble with this item is the very fine plastic ring dose not grip the pipe hard enough they to thin.
Ept - 1 / 5 - 19/03/2016
Very Poor
Made from cheap material which split after one week absolutely rubbish