45 people bought this in 48 hours
FloPlast P-trap Trap (Dia)32mm
Product details
Product information
Part of the drainage system, this tubular swivel waste p trap from FloPlast is made from hard-wearing plastic and has a compression fitting type. It's suitable for plastic and copper pipes.
Specifications
| Brand | FloPlast |
|---|---|
| Colour group | White |
| Connection type | Compression |
| Material | Plastic |
| Model name/number | 208421 |
| Pack quantity | 1 |
| Product diameter | 32mm |
| Product weight | 115g |
| Trap type | P |
| Product code | 5055149901300 |
Manufacturer / EU responsible person
Reviews
2.05 / 5(17 reviews)DVDDave - 4 / 5 - 05/07/2023
Does The Job
Fitted No problem. Looks a bit cheap (But is cheap) but no leaks. I put PTFE tape on the metal pipe and did not over tighten as I believe this is the most common problem. Tighten all of them up a bit at a time and only do up hand tight.
OxTimm - 1 / 5 - 22/02/2023
Rubbish
It leaks. Cheap as chips, but could cause much more cost in damage. I wish I had read the reviews first. What makes me really cross, is that B&Q must now know how useless it is and yet they still sell it.
Stu1066 - 1 / 5 - 04/01/2023
Don’t buy
One end fits 32mm pipe other end is designed for 34mm pipe. Don’t buy this product as it is very messy to put to a 32 mm system.
Rootie R - 2 / 5 - 30/12/2022
This product needs a thicker rubber washer
I didn't score full marks for this product as the rubber washer is too thin and caused leaks. I had to use the old and thicker rubber washer on the new floplast and that stopped the leaks.
Towcester Paul - 1 / 5 - 06/12/2022
Avoid - did not seal to standard 32mm waste
Could not get this to seal reliably to the 32mm sink waste despite repeated efforts. I noted other reviews reporting similar problem... wish I had taken heed (TAKE THIS ONE ONBOARD!). Problem was that shoulder on fitting was only slightly larger that the waste inside diameter (by 0.3mm) so as you do it up the whole fitting is pushed up inside the waste and the rubber seal is not compressed against the waste - NO SEAL!. Replaced with bottle trap from another manuacturer - perfect seal first time. I will be returning to B&Q as "not fit for purpose", have also notified FloPlast (I use their solvent weld fittings without issue so no general compaint against their products)
NORSEKJ - 1 / 5 - 30/01/2022
Awful! Should have read the reviews
Bought today and will be returning tomorrow for a refund to go and purchase elsewhere. Crossthreads connecting to the sink plug hole and doesn't create a seal (not a result of over-tightening either). Typically it's a Sunday and now I can't finish the sink in the downstairs toilet!
san 32 - 5 / 5 - 13/01/2022
Product is good
Does what it says on the box good value for the money
netty2464 - 3 / 5 - 16/09/2021
P trap
I bought this to replace the seals on my existing p trap although I haven’t needed to do any yet. I can’t report if the quality is good or bad but on past experience from other B&q plastic/pvc pipes they have been reasonable
BeyondDisappointed - 1 / 5 - 15/02/2020
Should have listened to the other reviewers
Could not get a seal at either end. I should not have to modify a brand new product to make it do what it is supposed to do.
Sruss - 1 / 5 - 23/10/2019
Incorrect size on the bottom outlet
As with other reviews on here the bottom outlet was around 1 to 2 mm too big, could not get a seal, modified by cutting the bottom fitting off and slid on a 32mm push fit, that done the trick, wouldn't recommend this item.