Sorry, this product is currently out of stock.
GoodHome Algiata Slate effect Worktop edging tape, (L)3m (W)24mm
Product details
Product information
Product information
Add the finishing touch to your laminate worktop with a matching edging strip. Kitchens are one of the busiest rooms in the home, so this late effect ABS edging strip has a high impact resistance for busy kitchens. Match this worktop edging from the Algiata range to your GoodHome worktop to give a professional finish to cut sides.
- Guarantee - 25 years
- Compatible with Worktops
- Instructions for fitting: Apply contact adhesive on the back of the ABS edging. Place the edging to the front edge of the worktop and press firmly
- Guarantee - 25 years
Features and benefits
- Easy to install
- Creates a uniformed look across the worktop
- Helps to protect against the general wear and tear that happens in the kitchen
Specifications
| Brand | GoodHome |
|---|---|
| Design | Edging matches the decor of the worktop |
| Finish | Matt |
| Material | ABS plastic |
| Pack quantity | 1 |
| Length (mm) | 3000mm |
| Thickness (mm) | 0.5mm |
| Weight (g) | 300g |
| Width (mm) | 24mm |
| Product code | 3663602635628 |
Manufacturer / EU responsible person
Manufacturer
Kingfisher International Products B.V.
Address
Rapenburgestraat 175, E,
Amsterdam
1011 VM
Netherlands
Contact
Reviews
2.75 / 5(4 reviews)Wakky46 - 4 / 5 - 05/03/2025
Slate tape
Expensive for what u get. The tape is good but pricey. I had no option but to buy
JustMeSaying - 5 / 5 - 25/02/2022
Balanced Review
Most worktop edging strips are fixed in place using either specialist double sided tape, or contact adhesive. All iron on edging strips (not normally supplied for worktops) have "iron on" in the product title or description. I am a Kitchen and bathroom fitter by trade although I haven't purchased this particular item, I thought this might help others, to balance the views of two non trade reviewers.
- 1 / 5 - 03/02/2022
Be warned
No instructions on pack. Assumed the same as other edging so got iron ready. NO NO NO. It melted & warped & clearly didn't have glue on it. Tried wood glue, NO NO NO. Didn't work either. I've used one roll already but not one piece has successfully stuck to worktop. Wonder what to fo now. Buy bulk super glu?
wills9539 - 1 / 5 - 08/12/2019
Avoid at all costs
To start with no instructions. Luckily I’ve used edging strip many times over the years so I know how to use the stuff. Set my iron to its lowest temperature without steam, placed the edging in the required position, covered with tea towel and gently ironed, moving the iron back and forth constantly so the heat wouldn’t stay in one place, but would release the glue. After 30 seconds I removed the tea towel to find that the glued backing hadn’t melted and the edging hadn’t stuck, but the whole edging strip had warped. I wish I could give it negative stars as I now have to make a 16 mile round trip to the store.