35 people bought this in 48 hours
GoodHome DECOR 15 Silver effect Threshold (L)93cm
Product details
Product information
Facilitate a smooth transition between floor surfaces with the GoodHome DECOR15 Silver Effect Threshold. This low-profile threshold provides a flawless connection, covering expansion gaps and safeguarding unfinished edges. Made from anodised aluminium, it offers a robust, scratch-resistant finish ideal for enduring use. Its silver sheen brings a decorative element to any area, ensuring both functionality and elegance. Setup is straightforward with a dual fitting system that guarantees a secure and flush result.
- For covering expansion gap between 2 any adjacent flooring of equal height, also effective along walls or skirting boards (with included end wedges)
- Comes with Fittings & fixings & end wedges included
- Self-adhesive
Features and benefits
- Decorative silver finish adds an elegant touch
- Dual fitting system for secure and seamless setup
- Includes a joining component for extending length when necessary
- Designed for smooth transition between equal-level floor surfaces
Specifications
| Brand | GoodHome |
|---|---|
| Effect | Silver effect |
| Material | Aluminium |
| Product length | 930mm |
| Product width | 37mm |
| Model name/number | DECOR15 |
| Pack quantity | 1 |
| Product code | 3663602529194 |
Manufacturer / EU responsible person
Reviews
3.33 / 5(15 reviews)Zephz - 5 / 5 - 14/04/2025
Great product
Looks great easy to fit very happy with the purchase
Gailfishburn01 - 5 / 5 - 12/03/2025
What it’s says it is . Size’s included and colour
Best idea , just cut and stick simple. Brought more fore other areas .
Toad1 - 4 / 5 - 08/03/2025
Good product
Yes happy with product, little pricey but did the hob that was needed.
Luc06 - 5 / 5 - 24/11/2024
Parfait
Parfait , mais à voir à l'usage dans le temps
ESpy - 1 / 5 - 30/06/2024
Absolute garbage
Supposed to handle 17mm height difference. so theoretically ideal for new laminate to existing vinyl. However. This relies upon the plastic mounting spigots flexing enough at the same time as the adhesive goo on the strip holding against the force of the spigots wanting to flex back. Surprise - the goo doesn't hold well enough, even when the surface has been cleaned. Completely unfit for purpose.
Tmi - 1 / 5 - 19/11/2023
Rubbish
Plastic grommets just bent and snap. The bar itself is flimsy and bends easily. Don’t waste your money.
Guzzma - 1 / 5 - 04/10/2023
Door threshold strip
I followed the (very small) instructions exactly. Fitting however proved impossible and i'm now left with two drilled holes in a concrete floor. Whilst the strip looks ok, the plastic fitting plugs are not strong or rigid enough and bend on fitting. Gave up, it's now in a bag awaiting return. Don't know when i'll next get to B&Q as i won't make the trip just for a return.
scoot3611 - 4 / 5 - 21/06/2023
Reasonable and durable
matched my laminate perfectly and looks great in place
steelwoolman - 5 / 5 - 29/10/2022
Perfect
Cut to correct length. Put masking tape down laid strip and marked with pencil along length. Used off cut and drilled pilot hole from underside in the centre ( groove assists this) used off cut to then drill pilot holes placing edge of offcut along pencil mark. Opened holes to 6mm. Removed masking tape. Positioned plastic pins in strip to line up with drilled holes laid on top and tapped in. Simples!
daveTOB - 5 / 5 - 22/02/2022
Went down perfectly - just do it patiently
Drill the right size holes (mine said 6mm) at the right depth and in a straight line. Clean out excess swarf. With the pins in even places ease it down slowly pushing each pin in by one click and move along the bar. Put fingers underneath until it’s close to the floor so you can feel the pins are going in straight (masking tape marking where they are avoids unnecessary contact with the glue strip). A pin bending isn’t going to correct itself - so you must STOP and find out why.