GoodHome Worktop joining bolts (H)16mm Pack of 3
Product details
Product information
Product information
This pack of 3 worktop connector bolts ensure your kitchen worktops are securely fixed into place, as well as prevent movement and gaps. Use along the lengths of 2 worktops to connect them, using a jig and router to create a flush surface finish.
- Purpose - Connect worktops & eliminate the need for surface mounted worktop joining strips
- One cabinet per bolt in each corner, eliminate the need for surface mounted worktop joining strips
- Guarantee - 25 years
Specifications
| Brand | GoodHome |
|---|---|
| Material | Steel |
| Pack quantity | 3 |
| Number of pieces | 3 |
| Length (mm) | 150mm |
| Product code | 3663602634560 |
Manufacturer / EU responsible person
Manufacturer
Kingfisher International Products B.V.
Address
Rapenburgestraat 175, E,
Amsterdam
1011 VM
Netherlands
Contact
Reviews
3.37 / 5(8 reviews)MR T - 5 / 5 - 03/08/2026
Worktop fixing bolts
Bought as part of our kitchen refit, not supplied with the kitchen or worktops, popped into the local B&Q to complete the build.
GBH1 - 4 / 5 - 05/01/2026
Not quite
Does the job but missing plastic clips to secure whilst you fasten. Other companies supplying these with clips for the same money when searching online.
Bobthebuilder41 - 5 / 5 - 04/11/2024
Good product
Did the job no problem would recommend to anyone fitting worktops.
Sabreb - 5 / 5 - 14/10/2024
Bolts
Bought this for our table, worked great, would recommend
Mesdyfre - 1 / 5 - 28/07/2024
Problème sur un produit depuis plusieurs années...
A chaque achat j'espère... Mais obligé je sortir le poste a souder... Le produit ne répond pas à la demande...mal usiné
cf23456 - 5 / 5 - 03/02/2023
Easy to fit
really easy to fit only needed a holesaw 6mm drill bit hammer chisel a marker pen and a square could have done with a paper template though to save time marking out
Baldandcrazy - 1 / 5 - 01/04/2021
I agree, useless.
As per previous reviewer after 10 months this product is still unsuitable for the job. The bolt register is 5.9mm square and the plate square hole is 7,5mm resulting in the bolt spinning on the plate. Why hasn't this been corrected yet?
Blaze_wn - 1 / 5 - 22/05/2020
Useless
Absolutely useless The square shoulder thats supposed to lock into the V plate is that small it just spins in the square slot in the V plate. So when you try to tighten the bolt the domed head end just spins. I had to weld the head to the V plate.