Leyland Trade Mercury Grey Contract matt Wall & ceiling Emulsion paint, 12L

Product information

Leyland Contract Matt Emulsion is specially formulated to provide a full bodied, high opacity, matt finish to all interior walls and ceilings making it ideal for new work application.

• Suitable for use on Wall & ceilings
• Surface Preparation - All surfaces to be painted should be clean, dry and free from loose and flaking material. Prime where required with Leyland Contract Primer Undercoat. Rub down glossy surfaces with fine waterproof abrasive paper and rinse thoroughly. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Seal absorbent surfaces with a solution of up to 1 part water to 9 parts Leyland Contract Matt.
• Instructions for Use - Plaster and embossed wallcoverings. Also suitable for use on wallboards, concrete, brickwork and blockwork.
• Instructions for Storage - Store between the following temperatures: 5 to 25°C. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabelled containers. Use appropriate containment to avoid environmental contamination.

Features and benefits

• High Opacity for a full bodied, matt finish
• Good covering power
• Recoatable after 2-4 hours
• Perfect for new builds
• For use on all interior walls and ceilings
• Suitable for plaster and embossed wall coverings, wallboards, concrete, brickwork and blockwork