Skip to content

6 people bought this in 48 hours

Magnusson Digital caliper

£23Inc. VAT

Product details

Product information

This stainless steel Magnusson Digital Caloper, features LCD display with characters measuring up to 2 digits in millimetres

  • Lifetime Guarantee

Features and benefits

  • The precision ground measuring faces allow for outside, inside, depth and step measurements with data output
  • Equipped with functions of absolute and relative measure
  • LCD display with characters measuring up to 2 digits in millimetres

Legal information

  • BATTERY WARNING: KEEP OUT OF REACH OF CHILDREN – Store spare batteries securely. Dispose of used batteries immediately and safely. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Specifications

BrandMagnusson
Length (mm)230mm
MaterialStainless steel
Metric or imperialMetric
Pack quantity1
Weight (g)310g
Product code3663602816324

Documents

Product Instruction Manual

Manufacturer / EU responsible person
Reviews
2.26 / 5(15 reviews)

PirateMike - 4 / 5 - 27/08/2024

Does the job I needed one for

Does the Job, would say for the price it's pretty good.

Matt C 1984 - 4 / 5 - 02/06/2024

It does the job but

If need digital callipers and don’t have much money spend on them they are ok. But it can add extra 5mm to reading every now and again. Recommend re measuring and zero the caliper

Ems123987 - 3 / 5 - 02/01/2024

Not Too bad

Pretty Poor quality for the price paid - Useful for the odd job. But cant use reliably

MickMo - 3 / 5 - 13/12/2023

it works and appears accurate

Its a bit clunky in use, not as nice as others I've used. It looked a bit grubby when I opened the box. But it works and that's the main thing,

Papaj - 2 / 5 - 19/03/2023

Does not measure accurately

I thought I was doing something stupid with this tool. When I measure using inch units it seems to work fine, but once I change to mm it gives a totally unrelated value. I am still hoping that I am doing something stupid!

UKAS lab guy - 1 / 5 - 04/07/2022

Doesn't meet spec.

This is advertised as meeting the tolerances the same as those specified in BS EN ISO 13385-1:2019. It doesn't max error found on calibration 0.05 mm. Calculated estimate of measurement uncertainty 0.061 mm for the item we purchased. I've not come across a digital caliper with this much error.

Kuj - 1 / 5 - 11/06/2021

Really bad

I bought, because there was no alternative in B&Q. This caliper is rubbish no worth single pens.

impvan - 1 / 5 - 08/04/2021

Only useful for prying tin lids off, nothing more.

Truly shockingly bad, and incapable of measuring any more accurately than a tailor's tape. The one I've just bought (as an emergency item - my Mito caliper left on a job) is visibly bent down the bar. The slider is full of fine swarf from the manufacturing. Jaws not parallel so you get a different reading near the bar than you do at the tips. There's daylight between the internal jaws, so anybody's guess what they would read. Worst of all, the bar isn't the same width along it's length - you adjust the slider to be snug at the closed end, then it binds half way down; adjust it so it doesn't bind and you get +/-0.2 error on thin stuff. By the time I'd pulled it to bits, cleaned out the swarf, partially straightened the bar, stoned the bar edges to something near parallel and taken off all the burrs - I could have driven over to where I left my decent calipers and still spent less on diesel than the twenty-odd quid that this thing cost....

Dplomat - 1 / 5 - 28/03/2021

Was also bit by the 5.08mm error

Renders the product totally useless. Tried some fix from instructables, made it less frequent but still present.

PeterJohnD - 4 / 5 - 07/12/2020

Accurate, package complete, no issues....

Package contained battery, zeroed correctly, accurate within stated tolerances, seems well made and robust.