Mangers 2 piece Rectangular Water tank jacket (H)1219mm (W)600mm (T)80mm
Product details
Product information
- Fire resistant
- Comes with Two piece wrap around jacket & tape
Features and benefits
- Will not rot or degrade in use. Resilient and non-combustible
- Wrap up your tank to protect it from potential damage from freezing
- Will not rot or degrade in use. Resilient and non-combustible
Specifications
| Brand | Mangers |
|---|---|
| Pack quantity | 1 |
| Product height | 1219mm |
| Material | Glass fibre & PVC |
| Product code | 5010918066260 |
Manufacturer / EU responsible person
Reviews
3.41 / 5(12 reviews)GeeTee2 - 5 / 5 - 18/01/2023
Water Tank Jacket
Easy to install with the added benefit that it also included a cover for the top of the cold water tank. The plastic string supplied was however too thin to be of use as it was difficult to tie up so I used a much thicker string to keep the Jacket in place.
Full time diyer - 5 / 5 - 03/11/2022
Water tank insulation
I bought this to replace old rolled insulation installed by previous occupant.
Mike56 - 5 / 5 - 24/10/2021
Very good
Slightly concerned with the poor reviews but took a chance as I needed to lag my cold water storage tank quickly. Followed the instructions and left for a few minutes to expand, fitted perfectly using Duck tape to secure. Very good product and priced sensibly.
Hewish DIY - 1 / 5 - 23/10/2017
Not as described. Small, thin torn.
I chose this as it was by Mangers and claimed to be 80 mm thick; it is not. It is barely 25 mm thick. While the polythene sheet was long enough the insulation inside did not reach around the tank and I had to add a piece of fibreglass to close the 300 mm gap. The top was equally thin and barely large enough to cover the tank.
No2869 - 4 / 5 - 10/01/2017
Good fit,easy to install
The tank looks tidy,and is now protected from freezing.
Fruity - 2 / 5 - 05/07/2015
Disappointed
Disappointing flimsy wrapper. Insulation foam moves to bottom when trying to wrap around tank. Need a lot of sellotape to join the 2 sheets togather
- 3 / 5 - 05/11/2014
Water tank jacket
Good size plastic is on the thin side only time will time on Jack Frost front
Diy Couple - 1 / 5 - 19/10/2014
Not impressed
Bought this to replace a 25 year old jacket following a leak. The old one was much better! This one is not 600mm thick as stated, more like 60mm, if that. By the time we had wrapped it round the tank most of the filling had slipped to the bottom of the bag. We had to cut the bag open to pull the filling up before tying the straps. Maybe in the filling was thicker it wouldn't slip down?
Leeky - 3 / 5 - 28/09/2013
Mangers cold water jacket 227L
All ok but the lid section could have been bigger.
Bluelilly - 5 / 5 - 07/04/2013
DIY made easy!!
This was really easy to install and took less than 10 minutes! The simplest diy job my husband and I have ever tackled!! The hardest part for me was getting out of the loft!!