Manrose White Flat to round ducting adaptor (Dia)100mm (W)110mm
Product details
Product information
Product information
The Manrose white flat to round ducting adaptor allows you to connect 100mm round ducting to a flat ducting system. This adaptor has a female fitting for straightforward connection. It's made from durable plastic and is ideal for use in bathrooms, kitchens, and utility rooms.
Features and benefits
- This adaptor allows you to connect round ducting to a flat ducting system, providing flexibility in your ventilation setup.
- The 100mm diameter is a standard size, making it compatible with a wide range of ducting systems.
- The female fitting allows for a straightforward connection, saving time.
- Made from durable plastic, this adaptor is designed to last.
- This white finish will coordinate well with existing ducting components.
Specifications
| Brand | Manrose |
|---|---|
| Colour | Grey |
| Diameter (mm) | 100mm |
| Height (mm) | 54mm |
| Model name/number | V40700 |
| Pack quantity | 1 |
| Width (mm) | 110mm |
| Product code | 5020953930372 |
Manufacturer / EU responsible person
EU responsible person
Manrose
Address
Kerver 16
Eersel
North Brabant
5521DJ
Netherlands
Contact
Reviews
3.6 / 5(10 reviews)Nath4 - 5 / 5 - 08/09/2022
Good quality
Good quality fit in perfectly on the hood extractor, job well done.
not knownn - 1 / 5 - 27/06/2022
V40700
Very poor quality, does not fit into 100mm round pipe as supplied, it should be 98mm instead of 104mm.
JimUK2001 - 4 / 5 - 16/06/2021
Nice product, but misleading description & picture
The description & picture for this product are wrong! The pack actually contains two reducers, the first reducing down from 150mm (6”) to 125mm (5”), and the second from 125mm to 100mm (4”). I bought these reducers to install my new kitchen extractor hood, which has a 150mm outlet, but I wanted it to vent through a 100mm flexible PVC tube. The fit between the two reducers was rather loose, so I glued them together with PVC cement, and this provided an airtight joint. I lined the inside of the 150mm inlet with draught excluder foam to provide a snug fit on the fan outlet, and taped the flexible hose to the 100mm outlet using the special white PVC tape from the same manufacturer. This product is absolutely fine & does what it’s supposed to, but the description & photos really need updating!
WILDHOUSE1 - 4 / 5 - 24/07/2017
DOES THE JOB
AS DESCRIBED. GOOD QUALITY. I HAD TO GET DUCT TAPE TO SECURE TO HOSE. DIDN'T MENTION ON PACKAGING AS SOMETHING I NEED TO HAVE TO FIX PEICES TOGETHER.
KFog - 5 / 5 - 13/03/2017
Fits in a very tight space
Fitted this beneath some joists and only had to lower the ceiling 50mm this adapt or did the job perfectly. We now have a ducted extract fan in our new cloakroom
- 1 / 5 - 13/04/2015
Wrong picture
3 years later and they still haven't corrected the photo.
diydoctor - 5 / 5 - 31/10/2012
rectify extraction through wall.
150mm extract fan had been fitted without any ducting through the wall to the outside where a wall plate grill hid the hole in the brickwork,yuk!! The reducer was ideal to transform from 150mm diameter down to 100mm diameter to attach to a louvered grill fitted flush into the exposed brickwork.
mogue - 5 / 5 - 30/01/2012
Just the job
The reducer we got looked nothing like the picture, it was in fact two separate components one reducing from 150-125 and another from 125-100. However with the addition of a roll of duct tape it worked perfectly.
lodger001 - 1 / 5 - 10/01/2012
wrong picture
The picture shows a tapered connection round to rectangular. Unfortunately in store I found it is not a taper it is a short connection. This was discovered when I called in to Reading store. The error was reported.
KITCHENFIXER - 5 / 5 - 18/09/2011
SMALL OUTLAY - BIG RESULT
100mm outlet through wall - 150mm outlet from cooker hood? Large problem cured with a small outlay! Thanks B &Q!