Minimalist Mirrored Grey 4 door Sliding Wardrobe Door kit (H)2260mm (W)2400mm
Offer - 20% off when you spend £750+ on selected bedroom products. Discount applied in basket.
Product details
Product information
Sliding wardrobe doors are a great space saving solution for your bedroom.
- Guarantee - 10 years
- Compatible with Spacepro sliding doors are only compatible with spacepro track sets
- Assembly required
- Comes with 4x sliding wardrobe doors, 2x bottom wheels on each door, 2x top guides on each door, 1x track set and instruction manual
Features and benefits
- Sliding doors are a great space saving solution for your bedroom, but can be used in kitchens, pantries or utility rooms, without loosing room depth needed for traditional hinged doors
- Spacepro sliding doors can be fitted in just a couple of hours. Simply install your top and bottom tracks, then position your doors in to place
- A track set is included in this kit and is colour matched to the frame
- 10 years manufacturer's guarantee on all moving parts
- Made in the UK
- Tracksets can be cut to size
- Designed to fit an opening height of 2260mm
- Install in a few hours
Specifications
| Brand | Spacepro |
|---|---|
| Colour | Grey Mirror |
| Door material | Glass |
| Door width | 4mm |
| Cut to size | Not cut |
| Fittings & fixings included | Only fixings included |
| Instructions for care | Do not use solvents or chemical cleaning agents on this product. Clean with a soft damp cloth and later use a clean cloth to wipe dry |
| Mirrored doors | Mirrored |
| Number of doors | 4 |
| Standard | BS EN12600:2002 (safety glass) |
| Style | Mirror |
| Track type | Double track |
| Product code | 5055332156470 |
Safety Information
Manufacturer / EU responsible person
Reviews
2 / 5(1 reviews)John182 - 2 / 5 - 25/02/2020
Instructions are useless, just throw them out.
The hight in the discription is wrong. Do not do what I did. Cut a hole in your wall and make a liner 2400 wide x 2260mm hight then paint it all up. I thought I was being smart leaving 5mm to play with. As it turns out you need 2275mm at least. I didn't want to take more than 10mm off the header as the timber would be a bit thin and I couldn't take more off the sole plate as I had glued it in. I think the twit that put the drawings up on the net, didn't allow for the runners. Now I have to fill and repaint. Also the edge of at least one of my doors is bowed, fortunately you can only see it with a 6foot spirt level or if I leave a light on in the cupboard. Someone's needs a kicking as it's made a lot of extra work for me.