Recticel Instafit Polyurethane Insulation board (L)2.4m (W)1.2m (T)120mm
Product details
Product information
Product information
Introducing the Instafit thermal PIR insulation board with a low emissivity multilayer coated aluminium facing, perfect for insulating walls, lofts, floors and pitched roofs. This insulation board is made of polyurethane and has a Euroclass fire performance rating of F. It meets the EN13165:2012 +A2: 2016 standard and has a coverage of 2.88m².
- Zero ozone depletion potential
- Zero ozone depletion potential
- Instafit thermal PIR insulation board with a low emissivity multilayer coated aluminium facing for wall, lofts, floors and pîtched roof
Features and benefits
- Lightweight
- Easy to cut and handle
- Low lambda 0,022
- Easy to install
- Will not degrade or deteriorate if exposed to moisture
Specifications
| Coverage | 2.88m² |
|---|---|
| Euroclass fire performance rating | F |
| Length (m) | 2.4m |
| Material | Polyurethane |
| Standard | EN13165:2012 +A2: 2016 |
| Thickness (mm) | 120mm |
| Width (cm) | 120cm |
| Product code | 5411545016688 |
Safety Information
In case of inhalation of large amounts of dust: move to open air and seek medical assistance if breathing becomes difficult
In case of injestion of the dust: drink large amounts of water and rinse the mouth thoroughly and seek medical assistance should any other symptom occur.
In case of contact of dust with the eyes: rinse the eye(s) thoroughly with clean water (for approximately 10 minutes) and seek medical assistance if symptoms persist.
In case of cuts: clean and disinfect the wound. If necessary, apply a bandage and seek medical assistance should any other symptom occur.
In case of a fire: decomposition products may be generated, such as soot, carbon monoxide, carbon dioxide, gaseous hydrocarbons, products containing nitrogen and, under certain conditions of combustion, hydrocyanic acid HCN. Firefighters are advised to wear self-contained breathing apparatus.
DO not breath in products of combusiton
Advised extinguishing media: water, foam, CO2 or dry powder.
It is recommended to wear gloves when handling the insulation boards.
Do not expose the product to flame for a long time and keep it away from any heat sources.
Manufacturer / EU responsible person
EU responsible person
Recticel Nv
Address
Zuidstraat 15
Meir Park
Stoke on Trent
Wevelgem
8560
Belgium