Ronseal Diamond Clear Gloss Wood Floor Varnish, 2.5L
Offer - 3 for 2 on selected Valspar and Ronseal paint. Discount applied in basket.
See more products in this offerProduct details
Product information
Ronseal Diamond Hard Floor Varnish gives floors Diamond Hard protection from shoes, scratches and spills, while highlighting the natural beauty of the wood.
- Suitable for Wood
- Guarantee - Statutory
Features and benefits
- Dries in 30 minutes
- Suitable for all interior wooden floors
- Non-yellowing finish
- Suitable for unvarnished and previously varnished floors
- Covers up to 18m2
Legal information
- Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2Hisothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Specifications
Brand | Ronseal |
---|---|
Colour | Clear |
Coverage | 45m² |
Location | Interior |
Drying time | 2 h |
Recoat time | 2 hours |
Finish | Gloss |
Durability | Heavy duty |
VOC level | Minimal |
Base | Water-based |
Application method | Brush |
Container type | Tin |
Suitable surface | Floor |
Washable | Washable |
Volume | 2500ml |
Product code | 5010214825820 |
Safety Information
Manufacturer / EU responsible person
Reviews
3 / 5(4 reviews)DIYER799 - 1 / 5 - 19/04/2023
Easy to use and good finish but terrible quality!
After the floor was finished it looked amazing but within a couple of weeks the entire floor is covered in scuff marks and they do not come out. Poor quality and not a diamond finish as every mark will show up
Mozarellafella - 4 / 5 - 06/07/2016
Looks good
Easy to apply and quick drying. Applied on parquet flooring.Still looks good after 2 wks. Hope it lasts
Olly19 - 2 / 5 - 05/01/2015
Regret it
After stripping my floor with a waterbased paint remover, i thought i would apply this. Shouldnt have done, looked better without.
berniethebolt - 5 / 5 - 06/01/2012
Does what it says on the tin
I had an old floor to varnish, complete with woodworn holes and some broken edges to the timber. The boards were, in the main, 170 years old. I replaced some with new wood which was a different colour. The varnish, after using a matching stain, gave superb results. A mirror finish after 4 coats.The old and new wood has merged into one giving a super smooth bare feet are ok feel. Brilliant product