6 people bought this in 48 hours
Ronseal Diamond hard Clear Satin Wood varnish, 2.5L
Offer - 3 for 2 on selected Valspar and Ronseal paint. Discount applied in basket.
See more products in this offerProduct details
Product information
This clear interior varnish from the Ronseal Interior diamond hard range can be applied to interior using a brush. The varnish dries in just 20 minutes and will cover up to 24 m² per litre on average.
- Suitable for Wood
Features and benefits
- Easy to use
- Dries in just 20 minutes
- Diamond Hard durability and protection
- Control air pollutants by choosing products with lower solvent levels
- Easy to use
- This Ronseal interior varnish provides a beautiful, natural finish for doors, skirting, tables, furniture and other wood inside your home. Diamond Hard protection provides superior resistance against scratches, knocks and scuffs. It is touch dry in 20 minutes and ready to re-coat in 1 hour.
- Low odour
Legal information
- Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2Hisothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Brand | Ronseal |
|---|---|
| Colour | Clear |
| Coverage | 40m² |
| Location | Interior |
| Drying time | 20 min |
| Recoat time | 1 hour |
| Finish | Satin |
| Durability | Medium duty |
| VOC level | Low |
| Base | Water-based |
| Application method | Brush |
| Container type | Tin |
| Washable | Washable |
| Volume | 2500ml |
| Product code | 5010214868728 |
Safety Information
Manufacturer / EU responsible person
Reviews
4.12 / 5(16 reviews)Katy36 - 5 / 5 - 12/04/2025
Great varnish
Great varnish. Did the job. Dried quickly so really quick and easy to get a few coats done.
dwilliams2025 - 4 / 5 - 09/03/2025
Good solvent-free quick drying varnish
Good solvent-free quick drying varnish. I prefer solvent-based for a strong durable finish but needed something that would cure quickly and would be tough (I'm using it on the ply lining in my camper conversion). It pays to prep beforehand to make the most of the varnish - clean and lightly sand the ply/timber first, and then lightly sand (at least 100grit) between each coat (I did 3 coats). Also don't put thick layers down as you'll get brush strokes which take longer to sand back. If you plan it carefully you can get 3 coats on in a day allowing each coat to dry before applying the next. I did see a few people having issues with it not curing properly and causing problems but wonder if it was a bad batch? I've not had any issues and this is my second tin (the first one I purchased a few years ago). Being water-based clean up is fairly easy without having to mess about with turps etc.
Spaniard - 5 / 5 - 01/10/2024
Excellent product.
Bought this product to apply to new doors, found it was excellent to bring out the natural colour of the wood, and to protect it.
Rafpainter - 5 / 5 - 01/08/2024
Varnish
Very good producy quick drying good finish highly recommend
Sureshbhai - 5 / 5 - 30/08/2023
Fantastic Product
I brought this product last month to treat my oak veneer doors and the finish is superb. The doors now look amazing.
NoToRonseal - 1 / 5 - 23/08/2023
Rubbish varnish - to be avoided.
I've been a Ronseal enthusiast for many decades. But that was when Ronseal's products were oil-based and fit-for-purpose. The 'new and improved' water-based varnish just does not work. I used the Antique Pine Interior Varnish Diamond Hard and made a complete mess of my pine floor. It is nearly impossible to hide brush strokes so the floor is covered in blobs and lines. I suspect the varnish is designed to off really, really fast so it can be re-coated in 2 hours.Looks like I'll need to strip my floor all over again. I'll never touch Ronseal products again.
Danwilk - 5 / 5 - 29/06/2023
Does what it says on the tin
Used it to protect our newly sanded wood floors. Easy to apply and went further than I expected!
7745 - 5 / 5 - 25/01/2023
Good for oak doors
Very good looks nice on our oak doors. Very easy to use 👍🏻
- 1 / 5 - 19/01/2023
Awful stays tacky
I made a large fitted desk/workstation in my attic room. It is constructed of a pine frame with chipboard inserts. In the areas where I rest my arms and use a mouse, the varnish has become tacky, feels almost rubberised and items stick to the desk and shelves. Some items I have had to put felt pads over rubber feet to prevent them from sticking. I spent a great deal of effort with the construction and the last finishing part has turned out to be a disaster. I have been a keen DIY enthusiast for over 40 years and never come across a problem like this; looking online it seems that quite a few others are having the same issue. The reason for using this varnish was because it dried clear and is advertised as Diamond hard, I should have used oil based like I did with the previous desk I made 30years ago, which still has the original coat of varnish. I am thoroughly disappointed with Ronseal's response, although they did offer to refund me the price of one tin. I am now faced with having to take it all apart, sand it down and re-varnish with an oil based product. I'll never again use water based varnishes or paints. Check out video before purchasing.
GBry - 5 / 5 - 11/01/2023
Perfect finish
Used this varnish on all our oak wood, doors etc. The satin finish looks superb. Very easy to use, with the right preparation.