Ronseal Diamond hard Dark oak Matt Wax Wood wax, 0.75L
Offer - 3 for 2 on selected Valspar and Ronseal paint. Discount applied in basket.
See more products in this offerProduct details
Product information
You can apply this wood wax from the Ronseal Interior diamond hard range to , using a brush, to colour and provide protection. It takes 20 minutes to dry and will cover up to 16 m² per litre on average.
- Surface Preparation - Make sure all surfaces are free from wax, grease & oil.
- Make sure all surfaces are free from wax, grease & oil.
Features and benefits
- Dries in just 20 minutes
- You don't need to buff between coats
- Easy to apply with a brush - No cloth, no mess
- Control air pollutants by choosing products with lower solvent levels
- Dries in just 20 minutes
- Easy to apply with a brush - No cloth, no mess
Legal information
- Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2Hisothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Brand | Ronseal |
|---|---|
| Finish | Matt |
| Coverage | 16m² |
| Recoat time | 1 hour |
| Durability | Heavy duty |
| VOC level | Medium |
| Volume | 750ml |
| Room use | Any room |
| Application method | Brush |
| Suitable surface | Multi-surface |
| Suitable for | All types of wood |
| Container type | Tin |
| Product code | 5010214868810 |
Safety Information
Manufacturer / EU responsible person
Reviews
4 / 5(3 reviews)ritzie - 5 / 5 - 25/05/2023
Exactly what I wanted!
Was difficult to tell the colour from opening the tin and even after application but dried to the colour specified on the tin and in good time also so was able to apply the next coats quickly after.
Skylark55 - 2 / 5 - 19/08/2022
Not as good as the old product
I have wood veneer MDF wardrobes and every now and then I give them a rub with stained wax. I usually use the more solid type of wax but this sounded easier (wrong). I prepared the doors and started painting. The wax is a greenish colour in the tin but that didn't bother me but unfortunately it did have a green tinge when applied also because I was painting vertically I had brush strokes which look awful. I should have taken the doors off but I have never had to before. Now I'm going to have to strip the doors and paint ? Something anyway. Disappointed. Bottom line RonsealI if you're bringing out a replacement product make sure it's better than the old product! I have used this product on a smaller project and it was just ok.
- 5 / 5 - 13/04/2016
Sceetons good.
I found this product very easy to use. It left a very good finish, no runs or splashes.