12 people bought this in 48 hours
Roof Pro Flexypol One Coat Black Roofing waterproofer, 5L
Under 18 yearsProduct details
Product information
RoofPro Flexypol is a solvent based acrylic coating, incorporating synthetic fibres and is designed specifically for the long term maintenance of domestic and industrial roofs.
- Store in a cool, dry place away from sources of ignition or naked flames. Minimum shelf life of 12 months in unopened, sealed containers
- Flammable liquid & vapour. Keep away from heat, hot surfaces, sparks open flames & other ignition sources. Do not breathe vapour. Do not breathe spray or mist. Toxic to aqautic life. Repeated exposure may cause skin dryness or cracking.
- Instructions for use: Stir vigorously, for at least two minutes, before use. This will ensure that fibres etc. that have fallen to the bottom of the tin (particularly if it has been stored in a warm place) are well dispersed back into the mixture; there should be a noticeable thickening and increase in resistance. Fibres should also be visible on the surface of the coating
Features and benefits
- Instant Waterproofing
- Single Coat Application
- Effective all weather treatment
- Can be applied in damp conditions
- Excellent adhesion to a wide range of building materials including asphalt, bitumen, concrete, brickwork, slate, metal and plastic guttering
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Specifications
| Brand | Roof Pro |
|---|---|
| Application conditions | Wet or dry |
| Colour | Black |
| Container type | Tin |
| Coverage | 5m² |
| Drying time | 48-72 h |
| Location | Exterior |
| Pack quantity | 1 |
| Paintable | Not paintable |
| Product weight | 5000g |
| Solvent-free | Solvented |
| Substance | Acrylic copolymer & reinforced fibres |
| VOC emissions class in indoor air | A |
| VOC level | High |
| Volume | 5000ml |
| Product code | 5060382235327 |
Safety Information
Manufacturer / EU responsible person
Reviews
4.11 / 5(9 reviews)Robon - 5 / 5 - 19/03/2025
Shed repair
Hi I love the shed rood one coat black roofing waterproofing it does work very happy
Dave1978 - 4 / 5 - 22/09/2024
Does what it says on the tin!
I bought this a month ago! good product does the job, my garage roof is water tight, prep is key be sure to remove any dust or organic materials! it contains epoxy fibres to strengthen any cracks or crevices it also dries very quick I will use this product again! I'd give five stars but it took a while by brush other than that it's gtreat
butterfly12 - 5 / 5 - 21/09/2024
Excellent waterproofing
Can even be used in rain. Great for flat roof waterproofing and emergency repairs.
PADLEY - 5 / 5 - 17/08/2024
Great product,
easy to paint on shed roof cover that is wearing away.
BAZH79 - 5 / 5 - 18/10/2023
Good sealer
Good sealer for my 11.5 × 5.5 concrete shed roof , just follow instructions, I kept this at room temperature before use , stir well for two minutes, don't try to paint this on ,use the paint brush more of a spreader , definitely works well if used correctly 😎👍
Rocky74 - 2 / 5 - 10/08/2023
Don't apply if you're tin is dented
I applied this to my large shed after click and collect from store.Two of the tins were dented,when applying the damaged tins were not pliable where air had got into tin.Ot has left a very poor finish to roof
Jeffw4 - 5 / 5 - 25/01/2023
Great product .did what it said
Bought this the other month to felt my bar roof .worked very well and easy to apply .
optimizer - 5 / 5 - 21/11/2022
Easy, Coats good, tips. Needs to be lots cheaper.
Commenting cos I saw someone write a review "EXTREMELY BAD, Clumps To Lumps Of Fluff." Blah Blah. That concerned me as I'd already bought a large tin. I was further concerned when I opened the tin, as it didn't look good. TIP, if using power mixer, use a "variable speed" drill/screwdriver, one speed is much more likely to send the goop flying from the stem. Keep cleaning it off mixer stem with a putty knife. Anyway, once applying it, it was, as expected, great. If you're having a fluff problem it means you're applying this wrong. This is essentially a watered down mastic, so you're using your brush as a trowel, not a brush. If you're a meanie trying to make the paint go further, you're applying it wrong, and the finished job won't last or won't solve the problem. You need to put this on thick, and when you do, it's obvious that this will work. I obviously don't have the results yet, it's a nice thick layer, the only potential issue I can think of is that regular trowel-on thick mastic can move in the sun and pinholes holes appear etc. Maybe the fibres aid in minimizing that? I'm thinking of giving the critical areas a second coat, which would make the fix bulletproof.
crispin - 1 / 5 - 18/09/2022
EXTREMELY BAD !!
Clumps into unsightly looking LUMPS OF FLUFF !! Then very difficult to remove, rectify and repair the damage done. (Does not stop leaks as stated). Not fit for purpose.l !!