35 people bought this in 48 hours
Rust-Oleum Universal Black Satin Multi-surface Topcoat Paint, 750ml Tin
How much will I need?
Product details
Product information
Rust-Oleum Universal Satin Black All-Surface Paint is the perfect solution for painting tricky interior and exterior surfaces and can be applied to a direct range of surfaces including uPVC, wood, metal, plastics, ceramic and more.
- Guarantee - Statutory
- Suitable for Metal, plastic & wood
- Water resistant
- Resistant to rust
- Surface Preparation - Remove oil, grease, and all other surface contamination by cleaning with appropriate detergents. Remove loose rust by scraping and wire brushing or sanding. Lightly abrade UPVC, remove any dust and wipe with methylated spirit. Prime suitably prepared metal, ferrous, non-ferrous, and galvanised with Universal Special Metals Primer. For stain blocking, prime first with Universal Stain Block Primer. Seal very porous surfaces where required with an appropriate sealer.
- Instructions for Use - Stir thoroughly before use. Thinning is not required. Apply 1-2 coats with a brush or short pile mohair roller. For roller application lay off immediately with a brush.
Features and benefits
- Paint and primer in one.
- Maximum adhesion for demanding substrates.
- Fade and chip resistant.
- Rust preventative.
- Durable satin finish.
- Suitable for interior and exterior use.
Specifications
| Brand | Rust-Oleum |
|---|---|
| Application method | Brush or roller |
| Base | Solvent-based |
| Colour | Black |
| Colour group | Black |
| Container type | Tin |
| Coverage | 10m² |
| Drying time | 4 h |
| Finish | Satin |
| Location | Interior & exterior |
| Paint type | Topcoat |
| Recoat time | 16 hours |
| VOC level | High |
| Volume | 750ml |
| Product code | 5013296130394 |
Reviews
4.5 / 5(4 reviews)DIY Alec - 5 / 5 - 12/10/2024
Good quality paint
Used this product before to paint MDF and concrete. Excellent results. Purchased this time to paint quarry tiles. Paint is slightly thicker than other rival products giving a better and more resilient coverage. Only downside is that, as it isn’t water based, it does take time for any fumes to evaporate. Good ventilation will help. No loss of stars though as the end result is well worth it. Follow the instructions and usually 2 coats do the job.
Chardy - 5 / 5 - 27/08/2024
Excellent One Coat Paint
Having little room to get up to roof height to prepare and paint a cast iron foul pipe which had flaking paintwork and some rusty bald patches, I did some online research and found this Rust-Oleum paint was well reviewed. I can only sing its praises! Good viscosity (it is not 'non drip' so cover against drips), and excellent coverage. As it did the job in a single coat, it saved me from having to get up a steep ladder more than was needed. The satin finish is quite attractive and should disguise weathering better than gloss. I have since sanded some large rusty gate hinges and other gate bits and had great results again. My brushes cleaned up easily in white spirit.
VixM84 - 4 / 5 - 12/07/2023
Great product does what its needed to do!
Bought to paint kitchen worktops. Very thick but not horrendous to apply. Gives amazing coverage if not a little streaky in certain lighting. Hardwearing and doesn’t chip or flack. Overall very happy, would recommend
Riisargh5 - 4 / 5 - 28/03/2023
Does what I needed.
Great paint. Rather thicker than I'm used too but meant no drips (ofcourse I stirred it). Stick quite well. Needed 3 coats over gloss paint and 3 coats over melamine (the cheap wrapped fake wood stuff) and 2 coats over Matt paint. The satin has a slight shine which adds to the decadence of the black.