Terma Rolo mirror Modern grey Vertical Designer Radiator, (W)590mm x (H)1800mm

Product information

Upgrade your home heating with the Terma rolo mirror modern grey designer radiator, built from premium quality low carbon steel. This vertical model not only adds a touch of style to any room but also provides efficient and reliable heat distribution. The low carbon steel material is powder-coated. This radiator is (H)180cm x (W)59cm, 2854 BTU. This outstanding radiator with a impressive heat output of 2854000W guarantees a consistent warmth and even distribution throughout the room. A 2854000W designer radiator is ideal to warm a large bathroom, small bedroom or living room of approximateley 80 square feet. The distance of the wall to the centre of the bracket is 75mm. It has a has a maximum operating temperature of 95°C.

• Fixings supplied
• Guarantee - 8 years
• Only fixings included
• Guarantee - 8 years

Features and benefits

• Rolo Mirror offers the choice of either side or underside valve entry - so if you are limited in space vertically or horizontally you can tuck away the valves underneath or on the sides, to ensure it doesn't encroach out of the space assigned to it.
• This radiator features an internal diverter system for your plumber to aid the water flow as required depending how it is installed.
• The Rolo Mirror has very large internal holes where the front bare is recessed into the rear bar meaning there are very large internal holes for quick internal distribution of the water for super quick heat up times.
• Rolo features large, chunky 40mm diameter bars which offer a very high heat output.
• The Modern Grey colour is perfect for a mood inspired bathroom and has a matt, rough textured finish. Terma offers a 150x50mm colour chip of this finish should you wish to see the colour prior to purchase.
• Rolo Mirror is a portrait (vertical) model and although this could be fitted horizontally as it will work - we do not advise this.
• Please Note: Radiator valves are not included and need to be purchased separately. The valves shown in the image are an example of how this radiator could be fitted along with the radiator valves and pipe masking sets