Terma Smart Split (SS1) 1200W Silver Smart Thermostat temperature control Heating element probe

Product information

The Terma Smart Split (SS1) 1200W Silver Smart Thermostat Heating Element Probe provides reliable temperature control for your heating system, offering precise, energy-efficient heating. With smart features, it allows remote temperature adjustments, ensuring optimal comfort and warmth with minimal energy usage. Perfect for improving heating efficiency in any space.

• Guarantee - 2 years

Features and benefits

• The Terma Smart Split element probe is designed to work in combination with the VEO Range of Controllers to provide a fully functioning heating element.
• 650mm internal probe length.
• Wattage Selection Advice: To correctly choose the right wattage of element for your towel rail or radiator, you should look at the output of the chosen radiator as central heating (hydronic) in watts and choose an element with the wattage closest to that figure. If the output of the chosen radiator is only listed in BTUs, the conversion formula is BTUS / 3.41 = Watts.
• The higher wattage probes within this Smart Split range of 1500w, 1800w & 2000w are very powerful elements. Bear in mind the very long probe lengths of these higher wattage elements to ensure your radiator is long enough to take them. Note: The heating element probe shouldn't be longer than 70% of the length of the radiator. For reference here is a guide on the min. length the radiator should be to take these probes: 1500w probe = 880mm = so the radiator should be at least 1257mm in length; 1800w probe = 1015mm = so the radiator should be at least 1450mm in length; 2000w probe = 1150mm = so the radiator should be at least 1642mm in length.
• Electrification Advice: When making the decision to electrify any towel rail or radiator it is important to check with the manufacturer of that model that it is suitable to work with a heating element. Not all towel rails or radiators are suitable dependant on their design and how the heat will cycle internally around the rail, so avoid electrifying certain models as they won't work and this will not be the fault of the element.
• Dual Fuel Advice: If you are buying a heating element to convert a towel rail for use as dual fuel (electric in the summer and central heating in the winter) it is important to remember to regularly bleed the towel rail, as on a central heating system air can build up inside. A heating element should never be run in the open air as this could potentially cause the surface of the rail to get extremely hot and burn your towels. This is just the same as you would not run a kettle dry, so remember to regularly bleed to avoid any risk.