Universal 2 piece Screw Extractor set
Product details
Product information
This Universal screw extractor comes with 2 pieces.
- Comes with 0#, 1# and 1/4" quick shank
Features and benefits
- A great solution for removing stripped screws
Specifications
| Brand | Universal |
|---|---|
| Material | Galvanised steel |
| Model name/number | DRA59273 |
| Number of pieces | 2 |
| Shank size | 10mm |
| Shank type | Hex |
| Product code | 3663602808947 |
Manufacturer / EU responsible person
Reviews
2.41 / 5(12 reviews)Tibtib59 - 5 / 5 - 02/06/2023
Super efficace !
Le pas de la vis était complètement mort, j'ai essayé plusieurs méthodes dont celle de l"'élastique", en vain. Avant d'en arriver à faire une entaille dans la vis et donc abimé le meuble j'ai tenté ma chance avec l'extracteur. Et la, surprise ! cela m'a pris 30s pour l'extraire !
AzutUneCata - 1 / 5 - 16/01/2022
A cassé comme du sucre
Pour une petite vis, ça peut peut être marcher. Pour un boulon, à éviter, métal de mauvaise qualité la tête s'est cassé , temps d'utilisation = 30 secondes Morceau est resté dans l'avant trou = ce qui augmente la catastrophe
Pazman - 4 / 5 - 06/01/2022
Did the job
Removed shredded wall screw from rawplug, figured out how to use it as there were no instructions (the only downside to the product) just used an electric screw driver
Dr Cool - 4 / 5 - 16/10/2021
Worked for me!
On a very low speed and with some perseverance it worked well.
Daz83 - 1 / 5 - 17/08/2020
Useless
Won't bite so spins in screw head until thread worn. Complete waste of a tenner!
- 1 / 5 - 17/06/2020
Worst product ever!!!
If I could give 0 star rating I would. Absolutely useless doesn’t work in any way shape or form, not even close!! Don’t bother buying
David Fen - 1 / 5 - 16/06/2020
Don't be conned
Totally useless. Don't waste your money as I did. Go for a double headed type to give yourself any chance of success
Morphaniel - 4 / 5 - 10/05/2020
Worked Fine For Me
I bought these with trepidation because of the negative reviews but the 5 piece set seems to require a more complex approach to use and does not have universal chuck mounts. I was careful using these and have a good quality 2 speed Ryobi power drill that I used on the high torque setting and with not much pull on the trigger. They number 0 worked fine on 6" brass screws embedded in treated timber.
Plmtyy - 1 / 5 - 12/01/2020
Garbage
3rd garbage review. Taking these back. No instructions and when you figure it out, still no good..
Grandsmalls - 1 / 5 - 08/06/2019
I should have listened to the other review!
Didn't even try to bite. Made the problem worse and the remover is too soft