9 people bought this in 48 hours
V33 Renovation White Satinwood Radiator & appliance paint, 750ml
How much will I need?
Product details
Product information
V33 Radiator & Household Appliance paint can be applied direct to metal or PVC, providing a perfect, long lasting finish which is highly resistant to all of the bumps and scratches your radiators and household appliances can take.
- For use on Radiators
- Instructions for Use - Apply the paint at room temperature between 12 and 25°C and avoid draughts. 1. Stir the paint with a stirrer or wide stick, working around the bottom of the tin to mix it well. 2. Start by painting the angles, moldings and joints of the surface. Work on small surfaces. Apply from one end to the other. Follow with successive cross strokes. Do not start 2nd coat while it's still drying. Leave to dry for 6h (do not exceed 12h) and apply a 2nd coat in the same way. A 3rd coat may be requireddepending on the surface and colour.
Features and benefits
- 2-in-1 paint which requires no undercoat
- High Adhesion for direct to metal application
- High Resistance to temperature variation
- Ultra Washable for easy maintenance and resistant to household cleaning products
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Brand | V33 |
|---|---|
| Application method | Brush or roller |
| Base | Water-based |
| Colour | White |
| Coverage | 9m² |
| Container type | Tub |
| Drying time | 24 h |
| Finish | Satinwood |
| Location | Interior |
| Texture | Smooth |
| Recoat time | 6 hours |
| Minimum touch dry time | 1h |
| VOC level | Low |
| Volume | 750ml |
| Product code | 3153895182003 |
Reviews
4.75 / 5(8 reviews)Peter3142 - 5 / 5 - 11/04/2025
Radiator Paint
I bought this product last month, to paint my lounge radiators. This paint covered well and was very easy to apply.
JRC57 - 4 / 5 - 29/03/2025
This product is good
Simple to use and covers well on top of old Matt emulsion
Andy Dools - 5 / 5 - 23/11/2024
Excellent Paint for Radiators.
great product and service. Excellent Paint for radiators. It really cleaned them up and looks fab.
Pencil68 - 5 / 5 - 22/08/2024
Wonderful
Had never used before so was a bit nervous, but the paint went on so well, great covering dried quickly. Second coat went on the same , when finished my old yellow radiator looked like new.Would highly recommended.
Marc Noel - 5 / 5 - 18/04/2024
Worth every penny
Quality product that covers uniformly, however do not overload your brush/roller because this paint will run like an Olympic athlete if you do. Dry's quickly and does not appear to peel or yellow when subjected to high temperatures, quite expensive but at this stage it seems to be worth every penny. Good delivery timeframe from B & Q also.
SweetHenna - 5 / 5 - 09/11/2023
Great colour coverage!
It's great for radiators. Easy to apply . Very little paint smell
JulieBoop - 5 / 5 - 01/06/2023
Absolutely wonderful product
Did what it said it would covered a very old radiator and has made it look like new with little effort and still got loads left to do all my radiators! Absolutely delighted
P Jay - 4 / 5 - 07/01/2023
Some points before starting
I bought this paint and used it this month and some extra points need to be considered before starting. The application of the paint requires some more instructions. It says on the outside cover that it needs to be applied at room temperature ie, to an unheated radiator. For this reason I needed to shut the radiator down. This is a 6 year old radiator that has been on full power all the time the heating system is in operation and the thermostat and valve had never been moved and were fused into the one position. As a result I needed either a new thermostat or a new valve which shuts the water flow off when the thermostat is regulated down to ‘0’. This would have meant buying a new thermostat and a new regulator as well as employing a plumber to fit it all. You need to bear this in mind when using this paint for a radiator. However, I managed to fix it myself. Some radiators are installed without a thermostat, eg, those adjacent to the CH control thermostat which determines the temperature of the whole house. If you want to paint one of these you will need to get a plumber to fit the necessary valve and then work out some manual system to keep the house temperature stable. The next thing to bear in mind is that this radiator cannot be used for 2 days until the heat can be brought back gradually for 20 days when it can be at full heat. You have to therefore employ additional heating until this point. I used an electric heater (additional cost if you don’t own one already) but be careful when the room is not continually habited especially if you have pets, children or frail elderly relatives who might trip on the wire. It can’t be left unattended like the CH radiator can. Bear in mind the 6 to 12 hour rule after the first coat before a second can be applied. I put the first on early morning and second late afternoon. You can apply a third coat but the time after the second coat is not mentioned, I left it 12 hours, seems to be OK. Otherwise the finished paint looks good, only time will see whether it looks good after a year.