Valspar Trade Pure Brilliant White Matt Bare plaster paint, 10L

Product information

Valspar® Trade Bare Plaster Matt is a high opacity, low splatter paint with exceptional coverage and easy application. The formulation allows plastered surfaces to breathe and has been designed for faster results and a flawless finish. It's water-based formula means it’s both easy to use and clean up, providing optimal coverage in less time. Valspar® Trade - formulated for the perfect finish.

• Guarantee - Statutory
• Suitable for use on Wall & ceilings
• Surface Preparation - For indoor use only. Do not apply in damp or humid conditions. Newly plastered surfaces should be fully dried/cured. Apply when temperature of the surface being painted is above 10°C. The surface must be clean, dry and free of dust and grease. Glossy surfaces should be deglossed before painting. Remove old, loose or flaky paint and repair all damaged areas before painting.
• Instructions for Use - Stir well before use to ensure paint is thoroughly mixed. Apply 1-2 coats using a suitable brush, roller or sprayer. Apply liberally, avoiding excessive rolling or brushing, working from dry areas into the paint’s wet edge giving you a levelled finish. Touch dry in about 1 hour. Allow 2-4 hours between coats. When using a sprayer, refer to the sprayer user guide for full instructions before use. You can dilute this paint with water, however, when you dilute the formula you dilute the quality. Therefore, we cannot guarantee the claims we make on pack if the formula is diluted.
• Instructions for Storage - Protect from frost

Features and benefits

• High opacity with excellent coverage
• Allows new plaster to breathe
• Can be applied with brush, roller or by spray
• Covers up to 130m² per can
• Touch dry in 1 hour
• Re-coat in 2 to 4 hours
• Suitable for use on plasterboard