25 people bought this in 48 hours
Vitrex LASH30 Plastic 160mm Tile levelling spacer, Pack of 30
Product details
Product information
The Vitrex Tile Levelling System helps you with the installation of floor and wall tiles. It prevents uneven tiles and there are no tools needed. Perfect for all you DIY tiling projects.
- Guarantee - 1 year
- Single use only
- Suitable for use with Wall & floor tiles
Features and benefits
- Space wall and floor tiles evenly
- Ensures an even grout line throughout
- Supplied in a resealable bag or tub for easy and convenient storage
Specifications
| Brand | Vitrex |
|---|---|
| Height (mm) | 50mm |
| Material | Plastic |
| Maximum tile thickness | 12mm |
| Model name/number | LASH30 |
| Pack quantity | 30 |
| Thickness (mm) | 160mm |
| Weight (g) | 171g |
| Width (mm) | 210mm |
| Product code | 5011204613434 |
Manufacturer / EU responsible person
Reviews
1.85 / 5(14 reviews)DIY Grandmother - 1 / 5 - 11/03/2025
Too difficult to use
Bought these hoping to get perfect level floor, but as others found, even with large tiles I found it too difficult to get the spacer to “slip under” the edge of the tile, because of the curve. You would need to put a very thick layer of tile cement under your tile to have space for these. If the tiles are large, they’re too heavy to get the thing under, if the tiles are small, they’re not heavy enough to press out the curve. I abandoned them and did without. I’m sure the principle is good, but not this brand. I would like to return them, but once you’ve opened the pack, of course you can’t. There must be an awful lot of these in recycling bins.
Cp001 - 2 / 5 - 22/02/2025
Poor
Didn’t rate these , base was too high causing issues with the amount of adhesive.. would have been ok if they was flat bottom base
RichN - 2 / 5 - 07/06/2023
Didn't like when compared to alternative products
The curved design of the part retained behind the tiles means that particularly for wall tiles, they lever the tile away from the wall during install. Once the wedge is inserted they sit OK as the curve is pulled out of the retained plastic part. I found this a real pain as some tiles had 2 or 3 of these per and they are fighting your careful placement. They were bought to supliment others I'd bought online which had a flat base. Much better and easier to use in my opinion.
user123456 - 2 / 5 - 26/05/2023
Other options are better
Other tile levelling options on the market offer a better solution to levelling
Grant1000 - 1 / 5 - 07/12/2022
Rubbish
The base stands about 6mm proud of the wall pushing the tile edge out. I would say these are only suitable for large floor tiles when using a large depth of adhesive. This should be made clear in the description. I bought the clips and wedges separately which turned out to be total waste of money.
Dannorite - 1 / 5 - 08/07/2022
Rubbish
Not good enough with the curved bottom. Makes the tiles move up too much causing mess and makes them unlevel, the wedges aren't big enough either.!!! I don't know how these are sold or even allowed to be made. Some ppl like em but y would you bother with these if u can just buy the flat bottom ones. Madness.
Delkan81 - 1 / 5 - 13/05/2022
Rubbish
They push the tiles away from adhesive... Total nightmare to use
Paulgrimsby - 5 / 5 - 15/01/2022
Great product, ignore the people's negative remark
I've used these on hundreds of m² over recent years. The whole point to the curve is to aline the tile - its for leverage. People have failed with this product because using the wrong adhesive and also not using the right combed trowel.... oh and back-buttering the tile too. So yeah, great product on large tiles. 600x600 plus in size.
Chalk - 1 / 5 - 07/06/2021
Dont waste your money they are useless
I never leave reviews but these where that bad i fought i should,.. I used these on a small floor and they don't even level off the tile... Complete rubbish. Shouldnt even be sold
Smudge10 - 1 / 5 - 14/05/2021
Rubbish!
Bought these to lay some 30x60 tiles in a conservitory floor, the product is flawed in that the bottom of the clips are half moon shaped and not flat. This means that when you push the wedges in they lift the tile up at least a 1cm of the floor and usally off of the adhesive you've put down. Now you've got what looks like level tiles but they are not even on the adhesive. Tried pushing the tiles down but the clips are too tuff to allow the tiles to drop.....had to start my tiling all over again after laying several tiles....not a good expirience at all! :(