16 people bought this in 48 hours
Volden Epoxy Resin, 25ml
Under 18 yearsProduct details
Product information
2-Part Epoxy adhesive formulated to bond a variety of substrates in 5 minutes.
- Guarantee - Statutory
- Compatible with Two part epoxy adhesives formulated to bond a variety of substrates in five minutes.
- Suitable for Ceramics, fibreglass, glass, leather, metal & plastics
- DANGER Hardener: Contains : Reaction products of pentaerythritol, propoxylated and 1-chloro-2,3-epoxypropane with hydrogen sulfide. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye damage. Harmful to aquatic life with long lasting effects. Keep out of reach of children. Avoid breathing dust, fume, gas, mist, spray, vapours. Wash hands thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Avoid release to the environment. Wear eye protection, protective gloves.
Features and benefits
- Suitable for interior and exterior applications
- Heat resistant up to 80
- Syringe allows for even mixture ratio for better performance
- Directions for use: Push plunger to dispense equal amounts of resin and hardener into the plastic blister shell and mix thoroughly for approximately 1 minute. Apply the epoxy to both surfaces and join parts together. Full cure in 12 hours. After use, wipe tips to remove residual product and reseal the nozzle using the cap provided, ready for use next time. Cures light yellow in colour.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Details
DetailsSpecifications
| Brand | Volden |
|---|---|
| Colour | Pale yellow |
| Location | Internal & external |
| Number of pieces | 1 |
| Pack quantity | 1 |
| Resin type | Epoxy |
| Volume | 25ml |
| Weight (g) | 28g |
| Product code | 5059340613376 |
Manufacturer / EU responsible person
Reviews
4.1 / 5(28 reviews)RecentUser - 5 / 5 - 21/04/2025
Good Product
I found the product good and easy to use. It does what it says on the tin so to speak.
bobber1 - 4 / 5 - 19/02/2025
Waiting to be used
I have not used this yet but it's competitively priced.
J2B2 - 4 / 5 - 12/02/2025
Sorted
Good value hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhiiiiiiiiiiiiiiiiiiiiiiiii
Shoes 51 - 5 / 5 - 11/02/2025
Great glue
Needed an epoxy glue to glue different materials together in steel like finish. Worked great
Superhands78 - 5 / 5 - 27/01/2025
Great Product
Very good product, does what it says on the tin. Excellent product
Grumpypotter - 5 / 5 - 02/12/2024
Epoxy glue
Easy to use, with a well designed one way fit cover. Glue sets well with good adhesion.
Buzzard72 - 5 / 5 - 11/11/2024
Good adhesive
Holds very well alongside more Expensive products A1
Skyelark3 - 3 / 5 - 09/09/2024
Uneven dispensing.
I bought this product recently and I found that the double plunger method of dispensing the adhesive + hardener to result in an uneven mix. In the case of first use there seemed to be a delay before the hardener came out of the nozzle. This resulted in a very weak mix which took a couple of days to cure and even then it did not fully harden but remained pliable. I prefer the two independent tube method with better control of product.
ZZman - 1 / 5 - 15/02/2024
Don't waste your money
This product is rubbish. I put it on a surface and it just didn't go hard it just when like jelly. I most definitely would not recommend this product
- 1 / 5 - 21/01/2024
To difficult to operate efficiently.
I bought this because I thought it would be easier to mix but I found the mixing inconsistent. Also the rubber bung broke off , blocking the exit hole on one side . It's ok for a couple of big mixes/jobs but constantly mixing small amounts sticks the ends up to much , even with cleaning. I'm going back to two separate tubes under my control.