Volden Hand-held Gap filling Expanding foam 500ml

Product information

A moisture-curing, one component, self expanding polyurethane foam for filling, fixing, insulating and mounting.

• Comes with Straw Nozzle & Gloves
• Take the usual labour hygiene into account. Always wear gloves and goggles. Remove cured foam mechanically. Never burn away. Consult label and material safety data sheet for more information. Use only in well ventilated areas.
• Instructions for use: 1. Surfaces should be clean and free from loose particles, dust and grease. 2. Moisten surface with water before application for best results. If necessary, protect areas with masking tape. 3. Shake the aerosol can for at least 30 seconds. 4. Remove the cap and protective gloves contained. Ensure gloves and eye/face protection are worn prior to product use.5. Attach the applicator nozzle on the valve, without overtightening.6. Activate the applicator nozzle, point and apply. The amount of pressure applied defines speed of application. THE CAN MUST ALWAYS BE USED WITH THE VALVE FACING DOWNWARDS.7. Joints and cavities should only be filled 50% to 70% as foam expands twice its original volume. For deep cavities/seals the foam should be applied in layers. Apply moisture to increase curing speed. 8. Excess foam can be removed whilst wet with PU foam cleaner or acetone. Do not use water. Cured product can be removed mechanically only.

Features and benefits

• High thermal and acoustic insulation
• HCFC- and CFC-free propellants
• High filling capacity with excellent adhesion and stability to most common building materials including concrete, brickwork, stone, plaster, wood, metal, insulation materials, pipes, cables and ducts and PVC (except PE, PP and PTFE).