Volden Liquid Superglue 10ml

Product information

High strength, fast setting adhesive, suitable for most types of fastening jobs.

• Guarantee - Statutory
• Suitable for Glass, metal, porcelain, rubber & plastics except PTFE, HDPE, PP
• Apply a small amount of adhesive to one surface. Press parts together and hold firmly for approximately 10 seconds until a bond is formed. Maximum strength is achieved in 24 to 48 hours.
• Keep adhesive in a cool, dry place 20-25 degrees. For long term storage refrigiration (5 degrees) is recommended
• WARNING Contains: ETHYL-2-CYANOACRYLATE. Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children. Causes skin irritation. Causes serious eye irritation. May cause respiratory irritation. Avoid breathing dust, fume, gas, mist, spray, vapours. Wash hands thoroughly after handling. Use only outdoors or in a well-ventilated area. Wear protective gloves, eye protection.

Features and benefits

• Precision nozzle enables greater control, even for the smallest of jobs
• Crystal clear drying
• Not suitable for plastics such as PTFE, HDPE and PP
• Surface preparation: make sure the surfaces to be bonded are clean and dry (preferable to solvent-wipe plastics, glass and rubber and to acid-treat metals).
• Cleaning instructions: wipe off excess adhesive from the top of the nozzle and replace the cap. If left uncapped, the product may deteriorate by contamination from moisture in the air.